Displays the list of flag parameters for redirecting capability flags.
To View and Edit Flags
On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Redirection Capability Flags > Flags.
Select the desired Signaling Profile from the drop-down list to view its respective Redirection Capability Flags parameters.
This option displays parameters only when Redirection Capability Flags options is enabled.
The Flags window is displayed.
Configuration - Profile Management - Signaling profile - egress - Redirection capability Flags - Flags
The following fields are displayed:
Signaling Profile - Egress - Redirection Capability Flags - Flags parameters
Parameter | Description |
---|
Check Carrier Code Combination | When enabled, SBC matches the carrier code in the call against configured carrier codes in the Carrier Code Combination Profile. The options are: |
Check Ingress Trunk Grp Redirection Capability | When enabled, SBC checks for Ingress Trunk Group redirection capabilities. The options are: |
Check Number Control Profile For Received Called Number | When enabled, SBC checks the Number Control Profile for a match on the received called number. The options are: |
Check Received Redirection Params | When enabled, SBC checks for both the redirection capability parameter and the redirection information parameter. The options are: |
Check Redirection Cap of Number Used for Routing In Number Control Profile | When enabled, SBC checks for redirection capabilities for the number used for routing. The options are: |
Check Sip Indirect Dip And Username Translation Source Number | When enabled, SBC checks whether the received request is a SIP Indirect DIP and whether it contains the Translation Source Number. The options are: |
Create Called Directory Number in Egress Signal On Redirection | When enabled, the original called party is sent by the GSX as the Called Directory Number. The options are: |
Skip Redirection On RACIndication Set | When enabled, if the Representative Area Code indicator is set to On in the JTI parameter, the GSX does not perform redirection. The options are: |