Use the registerContactProfileName parameter to assign a Register Contact profile to a zone. This could be needed to ensure that each registration is recognized as distinct when a user residing behind a PBX sends registration requests from multiple devices (such as a phone and laptop). 

For more information on Register Contact profiles, refer to:

Command Syntax

The following is the command syntax for assigning a Register Contact profile to a zone. 

% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>

Command Parameter

The following table describes the parameter used to assign a Register Contact profile to a zone.

Zone Parameter for Assigning a Register Contact Profile

ParameterDescription

registerContactProfileName

<registerContactProfile name> – Specifies the name of a Register Contact profile to assign to a zone.

The SBC uses the Contact header elements specified in the profile as additional keys when it creates or retrieves registration control blocks (RCBs) for users registering through this zone.