This object specifies a Network Time Protocol (NTP) server that supplies local time to the SBC. The reference time delivered by NTP is the source of all timestamps placed into the accounting records. The SBC supports up to three NTP servers. On the SBC main screen, go to Configuration > System Setup > NTP > Server Admin. The Server Admin window is displayed. NTP - Server Admin To edit any of the Server Admins in the list, click the radio button next to the specific Server Admin name. The Edit Selected Server Admin window is displayed below. NTP - Server Admin Edit Make the required changes and click Save. To create a new Server Admin, click New Server Admin tab on the Server Admin List panel. The Create New Server Admin window is displayed. NTP - Server Admin Create Enter all the required fields. You can click Show only required fields to view and enter only the required fields to create a new Server Admin. NTP - Server Admin Parameters Parameter Description IP Address V4 or V6 Specifies the IPv4 or IPv6 address of this NTP server. State Specifies the configured state of this NTP Server. Version Specifies the NTP version of this Server. Min Poll Specifies the minimum poll interval, in seconds to the power of 2, for this NTP Server. The Min Poll parameter value range is 4 - 17 (16 seconds to 36.4 hours). The default value is 4. Max Poll Specifies the maximum poll interval, in seconds to the power of 2, for this NTP Server. The Max Poll parameter value range is 10 - 17 (1,024 seconds to 36.4 hours). The default value is 10. The NTP asymmetric authentication key to authenticate the server. To copy any of the created Server Admin and to make any minor changes, click the radio button next to the specific Server Admin to highlight the row. Click Copy Server Admin tab on the Server Admin List panel. The Copy Selected Server Admin window is displayed along with the field details which can be edited. NTP - Server Admin Copy Make the required changes to the required fields and click Save to save the changes. The copied Server Admin is displayed at the bottom of the original Server Admin in the Server Admin List panel. To delete any of the created Server Admins, click the radio button next to the Server Admin which you want to delete. Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision. Click Yes to remove the specific Server Admin from the list.
Note
To View NTP Server Admin
To Edit NTP Server Admin
To Create NTP Server Admin
Auth Key The NTP symmetric authentication key to authenticate the server. Autokey To Copy NTP Server Admin
To Delete NTP Server Admin
Overview
Content Tools