Use the U Flow Stats window to view micro flow policer statistics.
From the SBC main screen, go to All > System > IP Policing > U Flow Stats.
The U Flow Stats window opens.
Figure 1: U Flow Stats Window
The following parameters appear:
Table 1: Micro Flow Stats Parameters
| Parameter | Description |
|---|---|
| U Flow Index | Index number of this uFlow statistic |
| Source IP Address | Source IP address |
| Destination IP Address | Destination IP address |
| Source IP Port | Source IP port |
| IP Protocol | IP protocol |
| Lif Grp ID | LIF group ID |
| Policer Mode | The Policer mode |
| Policer Bucket Size | Number of packets allowed in the Policer bucket |
| Policer Credit Rate | Packet fill rate (packets per second) |
| Agg Policer | The name of the aggregate policer |
| Agg Policer Priority | Aggregate policer priority level |
| Packet Accept | The number of packets accepted by the policer |
| Packet Discard | Number of packets discarded by the policer |
| Byte Accept | The number of bytes accepted by the policer |
Overview
Content Tools