Specifies the parameters associated with the Port Redundancy Group Status object.
On SBC main screen, go to All > System > Ethernet Port > Port Redundancy Group Status. The Port Redundancy Group Status window is displayed.
Figure 1: System - Port Redundancy Group Status
By default only ten entries are displayed in a view. You can choose the number of entries to be displayed under the Show entries drop down box.
The following fields are displayed:
Table 1: Port Redundancy Group Status parameters
| Parameter | Description |
|---|---|
Ce name | The server name. |
Prg Name | The name of the port redundancy group. |
Pm Name | The name of this port Monitor. |
Interface Type | Interface Type of this port redundancy group.
|
Port Monitor Count | The number of port monitors configured in this port redundancy group. |
If Index | The unique ifIndex of this Packet NIF. |
If Num | The unique ifNum of this Packet NIF. |
Primary Mac Address | The Primary MAC address of the network interface. |
Secondary Mac Address | The Secondary MAC address of the network interface. |
State | The state of the physical port.
|
Failures | The current number of port monitors within this port redundancy group that have declared themselves failed. |
Failure Count | Total number of port monitor failures within this port redundancy group. |
Overview
Content Tools