The Number Globalization Profile object is used to define numbers that are to be globalized for egress SIP message headers. Specify a profile entry for each number type that needs to be globalized. The profile includes a digit type, a source for the country code, and a flag to enable the globalization. Assign Globalize Profiles to egress trunk groups by selecting them on the IP Signaling Profile for each trunk group.


Note

The SBC supports globalizing the Request-URI by enabling globalization for the called number and enabling the To-Header Transparency flag. Thus, the Request-URI called number is not transmitted transparently to the egress leg (To-Header transparency flag will not affect Request-URI globalization). Note that Request-URI globalization is independent of the To-Header Transparency. This functionality applies to all scenarios where To-Header transparency is enabled, such as:

  • Redirection scenarios
  • Refer scenario
  • Interaction with Undo LNP
  • Modifying hostname of reqURI

To View Number Globalization Profile

On the SBC main screen, choose a path:

  • Configuration > System Provisioning > Category: Call Routing > Profiles > Number Globalization Profile
  • Configuration > Profile Management > Category: Signaling Profiles > Number Globalization Profile
  • All Profiles > Signaling > Number Globalization Profile

The Number Globalization Profile window is displayed.

To Edit Number Globalization Profile

To edit any of the Number Globalization Profile in the list, click the radio button next to the specific Number Globalization Profile name.

The Edit Selected Number Globalization Profile window is displayed below. You would not be able to edit any fields as they are read only.

To Create Number Globalization Profile

To create a new Number Globalization Profile, click New Number Globalization Profile tab on the Number Globalization Profile List panel.

The Create New Number Globalization Profile window is displayed.


To Delete Number Globalization Profile

To delete any of the created Number Globalization Profile, click the radio button next to the specific Number Globalization Profile.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific Number Globalization Profile from the list.


Number Globalization Profile Parameter:

ParameterDescription
Name

An identifier for this Number Globalization Profile.

Length: Up to 23 characters

Entry Parameters:

ParameterDescription
Number

The type of number to globalize.

  • 252
  • 253
  • 254
  • Billing Number
  • Call Directory Number
  • Called In Number
  • Called Number
  • Calling Number
  • Contractor Number (Generic variant only)
  • Dialed Number
  • From URI
  • Gn Additional Called
  • Gn Additional Calling
  • Gn Additional Connected
  • Gn Additional Original Called
  • Gn Additional Redirecting
  • Gn Additional Redirection
  • Gn Called Ces ID
  • Gn Collect Call Number
  • Gn Destination
  • Gn Dialed Digits
  • Gn Local ANI
  • Gn Network Provided Number
  • Gn Ported Dialed
  • Gn Redirecting Terminating
  • Gn Third Party Number
  • Gn User Calling Not Screened
  • Gn User Calling Screened
  • Location
  • None
  • Original Called Number
  • Outpulse Number
  • Presentation Number (Generic variant only)
  • Pretranslated
  • Redirection
  • Redirecting
  • Two Stage Collected
Digit Type

The digit type of the number to globalize. You can add them individually or in multiples.

  • subscriberType
  • nationalType
  • internationalType
  • subscriberOperator
  • nationalOperator
  • internationalOperator
  • verticalServiceCode
  • easilyIdentifiableNumber
  • tollFree
  • 900PremiumToll
  • 950CarrierAccess
  • localOperator
  • longDistanceOperator
  • emergency
  • directoryAssistance
  • serviceAccessCode
  •  ipVpn
  • test Transit
  • otherCarrierChosen
  • carrierAccess
  • noDigits
  • private
  • governmentEmergency
  • userName
  • ieps
  • all

Country Source
Code

The source of the country code to be used in the globalized number.

  • Destination (default)
  • Ingress Trunk Group
  • Origination

Globalize

When selected, this number type is enabled for globalizing. When deselected, the number type is not globalized. 

  • Disable (default)
  • Enable

  • No labels