On the SBC main screen, navigate to All → Profiles → Signaling →SIP XHeader Profile.
The SIP XHeader Profile window opens:
To create a new SIP XHeader Profile:
Click New SIP XHeader Profile. The Create New SIP XHeader Profile window opens.
- Use the following table to configure the parameters and then click Save.
SIP XHeader Profile Parameters
Parameter | Length/Range | Description | M/O |
---|
SIP XHeader Profile | 1-23 characters | Specifies the name of the SIP XHeader Profile to attach to a SIP trunk group to support various call transfer scenarios. For more information, refer to REFER Relay and INVITE with Replaces. | O |
State | N/A | Enables/disables the SIP XHeader Profile. Disabled (default) – Disables the SIP XHeader Profile. Enabled – Enables this profile, which adds SIP XHeaders to the outgoing messages, or parses them from the incoming messages.
| O |
To edit a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to edit. The Edit Selected SIP XHeader Profile window opens.
- Make any required changes to the profile and click Save.
To copy a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to copy.
- Click Copy SIP XHeader Profile. The Copy Selected SIP XHeader Profile window opens.
- Make any required changes to the profile and click Save.
To delete a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to delete.
- Click the delete icon (X) at the end of the row.
- Confirm the deletion when prompted.