In this section
Overview
The SBC supports sending the tenant number in the INPUT DATA to the PES, derived from the REFER SIP message's FROM header. A trunk group option, "Send Refer Transferor Number To PSX" controls this activity. When enabled, the INPUT DATA contains the tenant number from the REFER message.
View/Edit the Send Refer Transferor Number To PSX Parameter
- Log on to the SBC.
- Navigate to Configuration → System Provisioning → SIP Trunk Group → Services.
- Observe that the Services screen is displayed.
- Select an address context name from the Address Context drop-down list.
- Select a zone name from the Zone drop-down list.
- Select a SIP Trunk Group name from the SIP Trunk Group drop-down list.
- Observe that the Edit Services screen is displayed.
The following figure represents the Send Refer Transferor Number parameter in Services screen:
The following table represents the Send Refer Transferor Number To PSX parameter description:
| Parameter | Description |
|---|---|
Send Refer Transferor Number To PSX | Use this parameter to send the transferor party number to the PSX.
|
Overview
Content Tools