In this section:
Related articles:
The SBC supports the relaying TCP traffic in addition to SIP/SDP traffic with Relay Profile, a Relay Port configuration on a per-Zone basis.
To View Relay Profile
On the SBC main screen, go to All > Profiles > Services > Relay Profile.
The Relay Profile window is displayed.
Figure 1: Relay Profile
To Edit Relay Profile
To edit any of the Relay Profile in the list, click the radio button next to the specific Relay Profile name.
The Edit Selected Relay Profile window is displayed below.
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Relay Profile
To create a new Relay Profile, click New Relay Profile tab on the Relay Profile List panel.
The Create New Relay Profile window is displayed.
The following fields are displayed:
Table 1: Relay Profile Parameters
Parameter | Default Value | Description |
|---|---|---|
| NA | Specifies the name of the Relay Profile used by the Relay Port. |
Max Ingress Rate | 50 | Maximum rate at which ingress connections are accepted (conn/sec). |
Max Ingress Conn | 1000 | Maximum simultaneous ingress connections. |
Max Egress Rate | 50 | Maximum rate at which egress connections are accepted (conn/sec). |
Max Egress Conn | 1000 | Maximum simultaneous egress connections. |
To Copy Relay Profile
To copy any of the created Relay Profile and to make any minor changes, click the radio button next to the specific Relay Profile to highlight the row.
Click Copy Relay Profile tab on the Relay Profile List panel.
The Copy Selected Relay Profile window is displayed along with the field details which can be edited.
Make the required changes to the required fields and click Save to save the changes. The copied Relay Profile is displayed at the bottom of the original Relay Profile in the Relay Profile List panel.
To Delete Relay Profile
To delete any of the created Relay Profile, click the radio button next to the specific Relay Profile which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Relay Profile from the list.
Overview
Content Tools