In this Section:
Use the object DSCP Profile
to configure the DSCP values for HPC and non-HPC calls.
The use of the GETS SOFTWARE is restricted in the U.S. and U.S. TERRITORIES to NS/EP users authorized by the Office of the Manager, National Communications System (OMNCS).
Log on to the EMA as admin
and navigate to All > Profiles > Services > DSCP Profile. The DSCP Profile List window displays.
Figure 1: DSCP Profile List
The Create New DSCP Profile window displays.
Edit the fields in the window.
Table 1: DSCP Profile - fields descriptions
Parameter | Length/Range | Default | Description | M/O |
---|---|---|---|---|
Name | 1-23 characters | N/A | Name of the DSCP profile used to configure the SBC for HPC and non-HPC calls. | M |
State | N/A | Disabled | Use this flag to enable or disable the DSCP profile.
| O |
DSCP Value | 0-63 | 0 | Specifies the DSCP value reserved for non-HPC calls. | O |
Hpc Dscp Value | 0-63 | 0 | Specifies the DSCP value reserved for HPC calls. | O |
A success message displays.
Select the radio button corresponding to DSCP Profile in the DSCP Profile List window.
The Edit Selected DSCP Profile window displays.
The Copy Selected DSCP Profile window displays.
The Delete dscpProfile prompt displays.
A success message displays.