In this section:
Use this object to configure sets of call recording criteria that triggers call recording. The SBC supports up to 128 call recording criteria entities.
Command Syntax
% set global servers callRecordingCriteria <criteria name> calledPartyId <0-9> callingPartyId <0-9> criteriaState <disable | enable> egressTgId <EgSipTrunk | ingSipTrunk> ingressTgId <EgSipTrunk | ingSipTrunk> nextHopIP <IP address> numberOfCalls <0-99999> previousHopIP <IP address> recorderType <SIPRec | mct> recordingDuration <0-3600 seconds> recordingStopCriteria <manual | numOfCalls> recordingType <allLegs | bothLegs | egressLeg | ingressLeg> srsGroupCluster <SRS Group identifier> srsGroupProfile <SRS Group Profile name>
Call Recording Criteria Parameters
Parameter | Length/Range | Description |
---|---|---|
<Call Recording Criteria name> | 0-23 characters | Unique Call Recording Criteria name. |
| 0-9 digits | <called party number> – The called party number for which the call is recorded. (default = NULL) |
| 0-9 digits | <calling party number> – The calling party number for which the call is recorded. (default = NULL) |
| N/A | The administrative state of this Call Recording Criteria.
|
| N/A | Egress trunk group Id. The call terminating to this trunk group is recorded.
|
| N/A | Ingress trunk group Id. The call originating from this trunk group is recorded.
|
| IPv4/IPv6 format |
|
numberOfCalls | 0-99999 | The number of calls to occur to stop the recording criteria. (default = 5) NOTE: This attribute displays when NOTE: This parameter is not supported for SIPrec. |
| IPv4/IPv6 format |
|
| N/A | Call recorder type.
|
| 0-3600 | Duration of the recording, in seconds. (default = 0) NOTE: This parameter is only available if |
| N/A | Recording stop criteria.
|
| N/A | Call legs to record.
NOTE: |
| N/A |
|
| N/A |
|