In this section:

Related articles:

Use the IKE Protection Profile window to configure IKE Protection Profiles by establishing an encryption algorithm, the maximum SA lifetime, and other SA conditions, for an IKE peer. These properties are linked to each IKE peer that is provisioned with this profile.

To View IKE Protection Profiles

On the SBC main screen, go to Configuration > Profile Management > Category: Security Profiles > IKE Protection Profile.

The IKE Protection Profile window is displayed.

To Create an IKE Protection Profile

To create a new IKE Protection Profile, click New Ike Protection Profile.

The Create New IKE Protection Profile window opens.


Parameter

Length/Range

Description

Name

Up to 23 characters

The name of the IKE Protection Profile.

SA Lifetime
Time

1200-1000000

The SA Lifetime setting, in seconds. This is the maximum interval that any one  Security Association will be maintained before possible re-keying. The default is 28,800 seconds (Corresponds to 8 hours).

This parameter applies to the IKE SA when it  appears in the IKE Protection Profile and to the IPsec SA when it appears in the IPsec Protection Profile.

Dpd Interval

10-3600, or 

The IKE Protection Profile Dead Peer Detection test interval period in seconds. The value '0' corresponds to DPD disabled.

The default is 30.

Pfs Required


Enable flag to require PFS use during IPSec SA negotiation.

  • Disabled (default)
  • Enabled

To Edit IKE Protection Profiles

To edit an IKE Protection Profile:

  1. Click the radio button next to the specific IKE Protection Profile name. The Edit Selected Ike Protection Profile window opens.
  2. Make any required changes and click Save.

To Copy an IKE Protection Profile

To copy an IKE Protection Profile:

  1. Click the radio button next to IKE Protection Profile you want to copy.
  2. Click Copy IKE Protection Profile. The Copy Selected IKE Protection Profile window opens.
  3. Make any required changes to the fields and click Save. 

To Delete an IKE Protection Profile

To delete an IKE Protection Profile:

  1. Click the radio button next to the IKE Protection Profile you want to delete.
  2. Click the Delete icon (X) at the end of the row. 
  3. Confirm the deletion when prompted.


  • No labels