This section specifies the Call Limit Utilization (CLI) signaling quality measurement. On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Sip Trunk Advanced > QOE > Clu. The Clu window is displayed. You can check the QOE - Clu for each Address Context, Zone, and SIP Trunk Group created, or all Address Contexts, Zones, and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group. The Edit Clu window is displayed. SIP Trunk Advanced - QOE - Clu Edit Window Clu Parameters Parameter Description Make the required changes and click Save.To View and Edit QOE - Clu
Critical QOS Clu Limit Specifies the critical Call Limit Utilization (CLU), below which the call admission should be stopped. The value ranges from 80 - 100, and the default value is 80.