This section specifies the Call Limit Utilization (CLI) signaling quality measurement.

To View and Edit Qoe - Clu

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Qoe > Clu. The Clu window is displayed.

The Qoe - Clu can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.

The Edit Clu window is displayed.

Figure 1: H323 Trunk Advanced - Qoe - Clu Edit Window

The following fields are displayed:

Table 1: H323 Trunk Advanced - Qoe - Clu Parameters


Parameter


Description

Critical Qos Clu LimitSpecifies the critical Call Limit Utilization (CLU), below which the call admission should be stopped. The value range from 80 - 100 and the default value is 80.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels