This section specifies the ASR signaling quality measurement. On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Sip Trunk Advanced > QOE > Asr. The Asr window is displayed. You can check the QOE - Asr for each Address Context, Zone, and SIP Trunk Group created, or all Address Contexts, Zones, and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group. The Edit Asr window is displayed. SIP Trunk Advanced - QOE - Asr Edit Window Asr Parameters Parameter Description Default QOS Asr Critical QOS Asr Limit Major QOS Asr Limit Make the required changes and click Save.To View and Edit QOE - Asr
Specifies the default value for ASR when no calls are made for a sampling period. The value ranges from 0 - 100, and the default value is 90. Specifies the critical ASR limit below which the call admission should be stopped. The value ranges from 0 - 70, and the default value is 40. Specifies the major ASR limit below which the call admission should be reduced. The value ranges from 0 - 90, and the default value is 70.