In this section:

The Signaling Qos KPI Profile is associated with an IP Signaling Profile which in turn can be associated to an IP Peer or IP Signaling Peer Group Data or trunk group as a part of IP Signaling Profile.

To View IP Signaling Peer Group Data

On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > IP Signaling Peer Group > IP Signaling Peer Group Data.

Select the specific IP Signaling Peer Group from drop-down box on the IP Signaling Peer Group Data panel.

The IP Signaling Peer Group Data window is displayed.

To Edit IP Signaling Peer Group Data

To edit any of the IP Signaling Peer Group Data in the list, click the radio button next to the specific IP Signaling Peer Group Data name.

The Edit Selected IP Signaling Peer Group Data window is displayed below.

Make the required changes and click Save.

To Create IP Signaling Peer Group Data

To create a new IP Signaling Peer Group Data, click New IP Signaling Peer Group Data tab on the IP Signaling Peer Group Data List panel.

The Create New IP Signaling Peer Group Data window is displayed.


IP Signaling Peer Group Data Parameters:

Parameter

Description

Sequence

Specifies the sequence of this IP Signaling Peer Group Data.

Service Status

Specifies the type of service for this IP Signaling Peer Group Data. Select In Service to use this IP peer.

  • In Service
  • Out Of Service (default)

IP Address V4 or V6

Specifies the IP Address of this IP Signaling Peer Group Data.

IP Port

Specifies the TCP/UDP port value of this IP Signaling Peer Group Data.

FQDN

Specifies the FQDN value to use for sending egress calls/requests to the IP peer.

FQDN Port

Specifies the FQDN port number to be used for sending egress calls/requests to the IP peer.

To Copy IP Signaling Peer Group Data

To copy any of the created IP Signaling Peer Group Data and to make any minor changes, click the radio button next to the specific IP Signaling Peer Group Data to highlight the row.

Click Copy IP Signaling Peer Group Data tab on the IP Signaling Peer Group Data List panel.

The Copy Selected IP Signaling Peer Group Data window displays.


Make the required changes to the required fields and click Save. The copied IP Signaling Peer Group Data is displayed at the bottom of the original IP Signaling Peer Group Data in the IP Signaling Peer Group Data List panel.

To Delete IP Signaling Peer Group Data

To delete any of the created IP Signaling Peer Group Data, click the radio button next to the specific IP Signaling Peer Group Data which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific IP Signaling Peer Group Data from the list.


  • No labels