Use the Tone Profile entity to create node for tone profiles. Tone profiles include:

  • defBusy
  • defCallWaiting1
  • defCallWaiting2
  • defCallWaiting3
  • defCallWaiting4
  • defCpeAlerting
  • defDial
  • defReorder
  • defRing
  • defSit1
  • defSit2
  • defSit3
  • fccBusy
  • fccDial
  • fccRingback

To View Tone Profile

On the SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Tone Profile.

The Tone Profile window is displayed.

To Edit Tone Profile

To edit any of the Tone Profile in the list, click the radio button next to the specific Tone Profile name.

The Edit Selected Tone Profile window is displayed below.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Tone Profile

To create a new Tone Profile, click New Tone Profile tab on the Tone Profile List panel.

The Create New Tone Profile window is displayed.


Tone Profile Parameters:

Parameter

Description

Name

The user name of this tone profile.

Generation
Method

The tone package identifier defined by the Ribbon Softswitch for this package. Following are signal characteristics for generating tones:
• Single Tone—Configuration of single tone.
 Dual Tone—Configuration of dual tone.
 Modulated Tone—Configuration of modulated tone.
 Composite Tone—Configuration of composite tone.

Make1

Duration of the first on cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then the duration of the first on cadence is 0 msec.
  • If -1, the tone plays continuously.

Break1

Duration of the first off cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then silence is not generated between the on cadences.
  • If -1, then silence is generated continuously. 

Make2

Duration of the first on cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then the duration of the first on cadence is 0 msec.
  • If -1, the tone is played continuously. 

Break2

Duration of the first off cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then silence is not generated between the on cadences.
  • If -1, then silence is generated continuously.

Make3

Duration of the first on cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then the duration of the first on cadence is 0 msec.
  • If -1, the tone is played continuously. 

Break3

Duration of the first off cadence in milliseconds. Enter a value in the range of (-1...8000).

  • If 0, then silence is not generated between the on cadences.
  • If -1, then silence is generated continuously.

Repeat

The number of cadence cycles (1, 2, and 3 in sequence) to generate. If 0, the tone pattern repeats indefinitely.

Repeat1

The second number of cadence cycles to generate. If 0, the tone pattern repeats indefinitely.

Repeat2

The third number of cadence cycles to generate. If 0, the tone pattern repeats indefinitely.

Repeat3

The fourth number of cadence cycles to generate. If 0, the tone pattern repeats indefinitely.

To Copy Tone Profile

To copy any of the created Tone Profile and to make any minor changes, click the radio button next to the specific Tone Profile to highlight the row.

Click Copy Tone Profile tab on the Tone Profile List panel.

The Copy Selected Tone Profile window is displayed.

Make the required changes to the required fields and click Save. The copied Tone Profile is displayed at the bottom of the original Tone Profile in the Tone Profile List panel.

To Delete Tone Profile

To delete any of the created Tone Profile, click the "x" button next to the specific Tone Profile which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click OK to remove the specific Tone Profile from the list.


  • No labels