Note

Network-wide licensing using a site license server (SLS) has been discontinued and is no longer available on SBC 8.0 and later releases.

In this section:


Use this object to configure the notification threshold values for licensed sessions and for specific licensed features.

These thresholds, other than sessionsThreshold, apply to alarms that apply to local license mode only. Local license mode is not currently supported and therefore the associated alarms are not triggered. Refer to License Alarms in the Alarms Guide for information on alarms related to licensing. 

Command Syntax

% set global license sessionsThreshold <0-100>
                     dspAmrNbThreshold <0-100>
                     dspAmrWbThreshold <0-100>
                     dspEvrcThreshold  <0-100>
                     dspEvsThreshold   <0-100>
                     mrfSessionsThreshold <0-100>
                     niceRecThreshold  <0-100>
                     sipRecThreshold   <0-100>
                     sosbcSessionsThreshold (<0-100>)
                     srtpSessionsThreshold <0-100>
                     vdspThreshold     <0-100>
                     videoSessionsThreshold <0-100>

Command Parameters

Global License Parameters

Parameter

Length/Range

Description

sessionsThreshold

0-100

Notification threshold, as a percentage. (default = 90)

dspAmrNbThreshold
0-100Notification threshold, as a percentage. (default = 90)
dspAmrWbThreshold
0-100Notification threshold, as a percentage. (default = 90)
dspEvrcThreshold
0-100Notification threshold, as a percentage. (default = 90)

dspEvsThreshold

0-100Notification threshold, as a percentage. (default = 90)
mrfSessionsThreshold
0-100Notification threshold, as a percentage. (default = 90)
niceRecThreshold
0-100Notification threshold, as a percentage. (default = 90)
sipRecThreshold
0-100Notification threshold, as a percentage. (default = 90)

sosbcSessionsThreshold

10-100

Notification threshold, as a percentage. (default = 90)

Use this parameter to set the SoSBC session threshold, such that when the threshold is crossed, the alarm is raised to notify the user. 

NOTE: This threshold only applies when the SBC is configured for signaling-only mode.

srtpSessionsThreshold
0-100Notification threshold, as a percentage. (default = 90)
vdspThreshold
0-100Notification threshold, as a percentage. (default = 90)
videoSessionsThreshold
0-100Notification threshold, as a percentage. (default = 90)

Command Example

% set global license sessionsThreshold 80
% show global license  
   sessionsThreshold 80;