In this section:
The information on this page refers to standard 1:1 HA deployments of SBC SWe and does not apply to N:1 deployments. SBC SWe N:1 deployments on VMware are instantiated using the infrastructure as code (IaC) environment. For information on IaC, refer to Using the Ribbon IaC Environment to Deploy SBC SWe on VMware.
This section describes the installation of the ConnexIP operating system (OS) and the SBC SWe application software. The SBC application is installed using the Platform Manager GUI and it is configured either as a standalone installation or a high availability (HA) installation.
Before installing the SBC SWe OS and application, ensure the ports used by the SBC SWe are not blocked in your network. Refer to SBC Core Network Listener Ports.
The SBC SWe may be deployed in either a standalone or redundant HA configuration.
The SBC SWe standalone deployment consists of a single SBC SWe virtual machine. Gather the following information before starting the installation process:
IP Plan - Standalone Configuration
Input Parameter | Description | Example/Recommendation |
---|---|---|
Primary Management IPv4 Address | This specifies the physical management IPv4 address associated with the primary management network. | 10.11.13.10 |
Primary Management Network Mask | This specifies the netmask of the primary management network. | 255.255.255.0 |
Primary Management Gateway IPv4 Address | This specifies the default gateway IPv4 address associated with the primary management network. | 10.11.13.1 |
Primary Management IPv6 Address | This specifies the physical management IPv6 address associated with the primary management network. | fd00:10:6b50:4300::10b |
Primary Management IPv6 Prefix Length (0-128) | This specifies the prefix of the primary management network. | 60 |
Primary Management Gateway IPv6 Address | This specifies the default gateway IPv6 address associated with the primary management network. | fd00:10:6b50:4300::1 |
System Name | A unique name of the overall SBC system, limited to alphanumeric characters: A-Z (uppercase), 0-9. The first character must be an uppercase letter (A-Z) System Name is used for billing, external PSX queries (if applicable), and system logs | WFDSBC01
|
Local Hostname | The hostname of the local SBC SWe host in the network Typical naming convention is "<system name>a" | WFDSBC01a |
Peer Hostname | The hostname name of the peer SBC SWe host in the network | For a standalone configuration, Peer hostname is "none". |
Server Role | The role of the SBC SWe instance (active or standby) | In a standalone configuration, the server role is 'active'. |
Active CE IP | IP address assigned to the HA interface of the configured active SBC, used in an HA configuration for synchronization | Not used in a standalone configuration, use default value (169.254.99.1). |
Standby CE IP | IP address assigned to the HA interface of the configured standby SBC, used in an HA configuration for synchronization | Not used in a standalone configuration, use default value (169.254.88.1). |
HA Interface Mask (Inter CE Prefix) | Netmask of the network in which the active/standby IPs are configured | Not used in a standalone configuration, use default value (255.255.0.0). |
TIPC NETID | The SBC SWe uses the unique Transparent Inter-process Communication (TIPC) protocol ID to communicate between active and standby VMs. Use the same TIPC network ID (between 1000 and 9999) for both active and standby systems. | Not used in a standalone configuration, use 1500 (default). |
NTP Server IP | The IP address (supports both v4 and v6) of the NTP server. A NTP source is necessary for correct system operation. | E.g. 10.35.66.34 |
NTP Server Time Zone | The time zone of the NTP server location. | E.g. (GMT – 5:00) Eastern-US |
The SBC SWe is packaged in an .iso file which contains both the OS and the SBC application. The OS is first installed, and then the SBC application.
To install the OS, follow the steps in Installing Operating System on VMware ESXi Web Client. During this procedure, the SBC SWe management IP address is needed.
To install the SBC application in a standalone configuration, follow the steps in Installing SBC Application in Standalone Mode.
The SBC SWe can also be deployed in a redundant HA configuration with one standby SBC SWe virtual machine protecting the active SBC SWe virtual machine. The HA configuration shares the data between the systems and protects each other in a 1:1 redundancy model.
Gather the following information before starting the installation process:
IP Plan - HA Configuration
Input Parameter | Description | Example/Recommendation |
---|---|---|
Active SBC SWe Primary Management IPv4 Address | This specifies the physical management IPv4 address associated with the primary management network. | 10.11.13.10 |
Active SBC SWe Primary Management Network Mask | This specifies the netmask of the primary management network. | 255.255.255.0 |
Active SBC SWe Primary Management Default Gateway | This specifies the default gateway IPv4 address associated with the primary management network. | 10.11.13.1 |
Active SBC SWe Primary Management IPv6 Address | This specifies the physical management IPv6 address associated with the primary management network. | fd00:10:6b50:4300::10b |
Active SBC SWe Primary Management IPv6 Prefix Length (0-128) | This specifies the prefix of the primary management network. | 60 |
Active SBC SWe Primary Management Gateway IPv6 Address | This specifies the default gateway IPv6 address associated with the primary management network. | fd00:10:6b50:4300::1 |
Standby SBC SWe Primary Management IPv4 Address | This specifies the physical management IPv4 address associated with the primary management network. | 10.11.14.10 |
Standby SBC SWe Primary Management Network Mask | This specifies the netmask of the primary management network. | 255.255.255.0 |
Standby SBC SWe Primary Management Default Gateway | This specifies the default gateway IPv4 address associated with the primary management network. | 10.11.14.1 |
Standby SBC SWe Primary Management IPv6 Address | This specifies the physical management IPv6 address associated with the primary management network. | fd00:10:6b50:7500::10b |
Standby SBC SWe Primary Management IPv6 Prefix Length (0-128) | This specifies the prefix of the primary management network. | 60 |
Standby SBC SWe Primary Management Gateway IPv6 Address | This specifies the default gateway IPv6 address associated with the primary management network. | fd00:10:6b50:7500::1 |
System Name | System Name is used for billing, external PSX queries (if applicable), and system logs and must be a unique name throughout the SBC system. SBC naming is limited to alphanumeric characters: A-Z (uppercase), 0-9. The first character must be an uppercase letter (A-Z). | WFDSBC01
|
Local Hostname | The hostname of the local SBC SWe host in the network. Typical naming convention is "<system name>a". | WFDSBC01a |
Peer Hostname | The hostname name of the peer SBC SWe host in the network. Typical naming convention is "<system name>b". | WFDSBC01b |
Server Role | The role of the SBC SWe instance (active or standby). | 'active' or 'standby'. |
Active Primary CE IP | IP address assigned to the HA interface of the configured active SBC, used in an HA configuration for synchronization. | 169.254.99.1 NOTE: Active and standby CE IP addresses must be in the same subnet. |
Standby Primary CE IP | IP address assigned to the HA interface of the configured standby SBC, used in an HA configuration for synchronization. | 169.254.88.1 NOTE: Active and standby CE IP addresses must be in the same subnet. |
Inter CE Prefix | Netmask of the network in which the active/standby IPs are configured. | 255.255.0.0 |
TIPC NETID | The SBC SWe uses the unique Transparent Inter-process Communication (TIPC) protocol ID to communicate between active and standby VMs. Use the same TIPC network ID for both active and standby systems. | 1500 |
NTP Server IP | The IP address (supports either IPv4 and IPv6) of the NTP server. An NTP source is necessary for correct system operation. | E.g. 10.35.66.34 |
NTP Server Time Zone | The time zone of the NTP server location. | E.g. (GMT – 5:00) Eastern-US |
The SBC SWe is packaged in an .iso file which contains both the OS and the SBC application. The OS is installed first, and then the SBC application.
The OS and SBC application must be installed on both active and standby SBC SWe instances in the following order:
To install the operating system, follow the steps in Installing Operating System on VMware ESXi Web Client. The SBC SWe management IP address is needed for this step.
To install the SBC application in an HA configuration, follow the steps in Installing SBC Application in High Availability Mode.