Use this IP Signaling Profile 'Carrier Information' screen to allow/prevent ingress interworking with the terminating CA and CIC data from ISUP to SIP 18x messages.

To View and Edit Carrier Information

On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Ingress IP Attributes > Carrier Information. The Carrier Information window is displayed.

DEFAULT_H323

There are no Carrier Information parameters for H.323 Ingress IP Attributes.

DEFAULT_SIP

On the Carrier Information window, choose the IP Signaling Profile as DEFAULT_SIP to view the Carrier Information parameters for SIP Trunk Group.


Ingress IP Attributes - Carrier information Parameters:

Parameter

Description

Generate Terminating Ca

Use this flag on the ingress SIP side to decide whether to interwork the terminating CA data from ISUP to SIP 18x messages. When enabled, the SBC maps the terminating CA data from ISUP to SIP 18x messages. When disabled, the SBC does not map the terminating CA data from ISUP to SIP 18x messages.

  • Disable (default)
  • Enable
Generate Terminating Cic

Use this flag on the ingress SIP side to decide whether to interwork the terminating CIC data from ISUP to SIP 18x messages. When enabled, the SBC maps the terminating CIC data from ISUP to SIP 18x messages.

  • Disable (default) 
  • Enable 


Make the required changes and click Save.


  • No labels