On the SBC main screen, go to All > Address Context > IP Interface Group > Media Port Range Assigned or
Configuration > System Provisioning > Category: Base Provisioning > IP Interface Group > Media Port Range Assigned
The Media Port Range Assigned window opens. You can use the Address Context and IP Interface Group lists to filter the output.
Figure 1: Media Port Range Assigned
The following output is shown.
Table 1: Media Port Range Assigned Parameters
Parameter | Description |
---|---|
Base UDP Port | Indicates the minimum port value in the media port range. |
Max UDP Port | Indicates the maximum value in the media port range. |
Max Sessions | Indicates the maximum number of session this media port range could support. |
Media IP Address | Indicates the media IP address assigned to this trunk group, if any. |
TG Name | Indicates the name of the trunk group using this media port range. |