In this section:
This window allows you to configure a group of management IP interfaces for the default address context. A management IP interface must contain at least one IP address to be considered a valid interface.
To view management IP interface status details, go to:
On the SBC main screen, go to Monitoring > System > Category: Hardware Status > Mgmt Ip Interface Group. The Mgmt Ip Interface Group window is displayed.
Figure 1: Hardware Status - Mgmt Ip Interface Group
To edit any of the IP Interfaces in the list, click the radio button next to the specific IP Interface name.
Figure 2: Hardware Status - Mgmt Ip Interface Group Highlighted
The Edit Selected Mgmt Ip Interface Group window is displayed below.
Figure 3: Hardware Status - Mgmt Ip Interface Group Edit window
The Name field is read-only as denoted by the asterisk.
To Create Mgmt Ip Interface Group
To create a new Mgmt Ip Interface Group, click New Mgmt Ip Interface Group tab on the Mgmt Ip Interface Group List panel.
Figure 4: Hardware Status - Mgmt Ip Interface Group Fields
The Create New Mgmt Ip Interface Group window is displayed.
Figure 5: Hardware Status - Mgmt Ip Interface Group Create window
Enter all the required fields. You can click Show only required fields at the left hand bottom of the panel to view and enter only the required fields to create a new Mgmt Ip Interface Group.
The following fields are displayed:
Table 1: Mgmt Ip Interface Group Parameters
Parameter | Description |
---|---|
| Enter the IP Interface Group name. |
To delete any of the created Mgmt Ip Interface Group, click the radio button next to the IP Interface which you want to delete.
Figure 6: Hardware Status - Mgmt Ip Interface Group Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Figure 7: Hardware Status - Mgmt Ip Interface Group Delete Confirmation
Click Yes to remove the specific Mgmt Ip Interface Group from the list.