Use this object to specify the media configuration for this GW Trunk Group.

To View and Edit Media

On the SBC main screen, navigate to All > Address Context > Zone > GW Trunk Group > Media.

You can check the Media for each Address Context, Zone, and GW Trunk Group or all the Address Contexts, Zones, and GW Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone, and GW Trunk Group.


Media Parameters

ParameterDescription

Media IP Interface Group Name

Choose the Interface Group to use for this media configuration.

Media IP Address

Enter the IP address to use for media.

The default is "0.0.0.0".

Source Address  Filtering

If enabled, filter out incoming media packets that do not match the expected source IP address and UDP port.

  • Disabled (default)
  • Enabled

Direct Media Allowed

Specifies whether to enable the direct-media path so that media flows directly between endpoints in the same direct-media group or not.

  • Disabled (default)
  • Enabled

Make the required changes and click Save.


Additional topics:


  • No labels