The Packet Port Status window displays a node's negotiation speed and link state.
From the SBC main screen, navigate to Monitoring > Dashboard > Ports > Ethernet Port > Packet Port Status or
Monitoring > System > Category: Hardware Status > Ports > Ethernet Port > Packet Port Status
All > Ethernet Port > Packet Port Status
The Packet Port Status window displays.
Note:
The following figure shows example Packet Port Status output. Depending on your hardware model and interface configuration, the output will differ.
Figure 1: Packet Port Status
The following output is displayed:
Table 1: Packet Port Status parameters
| Parameter | Description |
|---|---|
| CE Name | The server name. |
| Port Name | The name of this port. |
| If Index | The unique interface index of this management NIF. |
| Mac Address | The MAC address of the network interface. |
| Negotiated Speed | The negotiated interface speed. |
| Max Bandwidth | This parameter shows the maximum bandwidth that the port is capable of supporting For example,
|
| Allocated Bandwidth | The bandwidth (bytes/second) allocated for a particular port for active media streams. |
| Rx Actual Bandwidth | The actual Rx bandwidth, which is used for a particular port (bytes/second). |
| Tx Actual Bandwidth | The actual Tx bandwidth, which is used for a particular port (bytes/second). |
| Bandwidth Usage | This parameter shows the percentage of load (Allocated Bandwidth) for a particular port using the formula: Allocated Bandwidth/Max Bandwidth * 100 |
| Bandwidth Deviation | This parameter shows the percentage of deviation of actual bandwidth from allocated bandwidth. |
| Link State | The state of the interface. |
Overview
Content Tools