Use this object to include a state for an alarm.

On the SBC Main Screen, go to All > Alarms > Current > State. The State window is displayed.

Figure 1: Command Window

From the Commands drop-down list, select Alarm/Alarm List and click Select. The alarm window is displayed.

The following fields are displayed:

Table 1: State Command Parameters

Parameter

Description

ID

Alarm identifier.

Alarm - If you had selected, enter a single alarm ID.

Alarm List - If you had selected Alarm List, enter multiple alarm IDs separated by comma (,).

Acknowledge State

Specifies the current operator state of the outstanding alarm. The options are:

  • Acknowledge
  • Un Acknowledge

Make the required changes and click alarm button. A success dialog box is displayed.

Click OK to finish.


  • No labels