In this section:


The SBC Core support enterprise access through H323 IP-PBX's located at customer premises.


Note

Each enterprise can be associated with multiple business locations.

Note

An asterisk * indicates that a field is mandatory.

Prerequisite

You can use the default Address Context or create a new Address Context from ALL perspective.

 Prerequisites for the workflow H323 Enterprise Access are:

  • Address context
  • IP Interface group
  • IP Interface

Workflow

This section provides a high-level understanding of H323 Enterprise Provisioning.

H323 Enterprise Access Provisioning Flow

The following figure shows the provisioning flow of the H323 Enterprise Access.

Step 1: Set Up Address Context and Zone

Perform the following tasks to setup the Zone:

  1. Navigate to Configuration > Configuration Wizards > H323 Enterprise Access > Setup a Zone.
  2. In the Address Context drop-down list, select the address context.
  3. Select the Zone from the drop-down list. 
  4. Select Next .
  5. To create a new Zone, click Create New Zone next to the Zone drop-down box and enter the following details:
    • Zone Name
    • DNS Group
    • Zone Id
  6. Select Save.


Note

For more information on creating Zone, refer to System Provisioning - Zone.

Step 2: Add a H323 Trunk Group

Perform the following tasks to add a H323 Trunk Group.

  1. Enter the H323 Trunk Group Name.
  2. Enter the following details:
    1. Policy
    2. Packet Outage
    3. Call Reservation
    4. CAC
    5. Services
    6. Media
    7. Call Routing
    8. Ingress IP Prefix

  3. Select Next . The following dialog appears:

  4. Select Yes to add more SIP Trunk Group, or select No to proceed.

Step 3: Add IP Peer (Optional)


Note

You can skip this step, if not required.

If you do not need to add an IP Peer, select Skip  to skip this step.

Perform the following procedure to add a IP Peer.

  1. Expand IP Peer.
  2. Enter the IP Peer details (Mandatory fields).

  3. Select Next to proceed.

  4. Select Yes to add more IP Peers and select No to continue.

Step 4: Finish and Save

When all configurations from the previous steps are complete: 

  1. Select Finish and Save. The result of this action is displayed.
  2. Select OK to exit.