Use this command to determine peer IP and peer port reachability using the specified transport.

On the SBC main screen, go to Troubleshooting > CallTrace and Logs > Cmds. The Commands window is displayed.

Select optionsPing command from the drop-down list and click Select. A pop-up window appears with the required fields to be filled.

The following fields are displayed:


optionsPing Parameters:


Parameter


Description

Sig Port

Specifies the Signaling Port to use for the ping. This field is mandatory.

Peer IP Address

Specifies the Peer SIP Address to ping. Enter IPv4 address in the following format:

  • IPv4 – The IPv4 address in dotted decimal form (for example 128.127.50.224).
  • IPv6 – The IPv6 address in hexadecimal/colon form (for example, 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).

This field is mandatory.

Peer Port

Specifies the Peer SIP Port Number to ping.

Transport

Choose a Transport Protocol type. 

  • TCP
  • TLS
  • UDP (default)
Peer FQDNSpecifies the value for peer SIP FQDN.

Click optionsPing once all the required fields are added.

Click OK to exit.



  • No labels