The disableZoneLevelLoopDetection flag controls when Zone-level Loop Detection is used for SBCs configured as EATF.


Note

The ERE is not supported for this configuration. You must use an external PSX.

Command Syntax

% set addressContext <addressContext name> zone <zone name> disableZoneLevelLoopDetection <disabled | enabled> 

Command Parameter

Zone Disable Zone Level Loop Detection Parameter

Parameter

Description

disableZoneLevelLoopDetection

Use this flag for SBC configured as EATF to control when Zone-level Loop Detection is used.

  • disabled (default) – Global Loop Detection flag takes precedence over Zone Loop Detection.
  • enabled – Loop Detection is disabled for the specified zone.
  • No labels