Not applicable to the SBC Software Edition (SWe).
On the SBC main screen, go to Monitoring > System > Category: Hardware Status > Daughter Board Status or
All > System > Daughter Board Status
The Daughter Board Status window opens.
Figure 1: Daughter Board Status
The following output is displayed:
Table 1: Daughter Board Status Parameters
Parameter | Description |
---|---|
Server Name | Server name. |
Slot | Specifies the slot associated with the board. |
Daughter Board ID | Daughter board identifier. SBC 7000:
|
Present | Indicates if the module is present (True or False). |
Product Name | Identifies manufacturer module name (if present). |
Serial Num | Identifies the serial number of the module (if present). |
Operational Status | Operational state of daughter board.
|
Image Load Failure Count | Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module. NOTE: This maintenance field does not apply to SPS100 cards. |
Fpga Version | A card’s programmed firmware version (using the FPGA build date). NOTE: This maintenance field does not apply to SPS100 cards. |