Use the Link Detection window to control at the system-level whether the SBC allows or drops broadcast ARP replies.
Caution
For SBC SWe deployments, enabling this parameter results in the SBC allowing through both ARP Broadcast opCode Reply and opCode Request packets. This can make the SBC susceptible to a false indication of link failure if the network carries a high volume of opCode Request packets. This type of packet is typically sent during broadcast ARP storms.
From the SBC main window, go to All > System > Admin > Link Detection
The Link Detection window opens.
Figure 1: Link Detection Window
Use the following table to set the link detection option and then click Save.
Table 1: Link Detection Parameter
| Parameter | Description |
|---|---|
| Allow ARP Broadcast Probe Reply | Specifies whether the SBC allows or drops broadcast replies to ARP probe requests on standby ports. The options are:
|
Overview
Content Tools