In this section:

Specifies details about Configuration related to signaling quality measured by ASR.

To View and Edit Asr

On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > QOE > Asr.

Select the desired Sip Cac Profile from the drop-down list to view its respective QOE - Asr parameters.

The Asr window is displayed.

Figure 1: Security Configuration - Sip Cac Profile - QOE - Asr

The following fields are displayed:

Table 1: QOE - Asr Parameters

Parameter

Description

Default Qos
Asr

Specifies the default value to be used as ASR when no calls are made for a sampling period. The value range from 0 -100.

Major Qos Asr
Limit

Specifies the major ASR limit, below which INFO log is generated. The value range from 0 - 90.

Asr Critical
Limit

Specifies the critical ASR limit, below which the call admission should be stopped. The value range from 0 - 70.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.



  • No labels