In this section:
The X-Header profile controls mapping of X-Headers to ISUP parameters in a specific environment. The X-headers are customer proprietary and are intended for their use only.
A default X-header profile is available, which has the values pre-seeded for all mandatory parameters. You cannot delete or modify this profile. However, you can create additional X-Header profiles change values, as required.
To View XHeader Profile
On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > XHeader Profile.
The XHeader Profile window is displayed.
Figure 1: Profile Management - Signaling Profiles - XHeader Profile
To Edit XHeader Profile
To edit any of the XHeader Profile in the list, click the radio button next to the specific XHeader Profile name.
The Edit Selected XHeader Profile window is displayed below.
You would not be able to make any changes as the filed are read-only.
To Create XHeader Profile
To create a new XHeader Profile, click New XHeader Profile tab on the XHeader Profile List panel.
Figure 2: Profile Management - Signaling Profiles - XHeader Profile Fields
The Create New XHeader Profile window is displayed.
Figure 3: Profile Management - Signaling Profiles - XHeader Profile Create Window
The following fields are displayed:
Table 1: X-Header Profile Parameters
Parameter | Description |
---|---|
Name | Specifies the unique name of the XHeader profile. The field supports up to 23 characters. |
To Copy XHeader Profile
To copy any of the created XHeader Profile and to make any minor changes, click the radio button next to the specific XHeader Profile to highlight the row.
Click Copy XHeader Profile tab on the XHeader Profile List panel.
Figure 4: Profile Management - Signaling Profiles - XHeader Profile Fields
The Copy Selected XHeader Profile window is displayed along with the field details which can be edited.
Figure 5: Profile Management - Signaling Profiles - XHeader Profile Copy Window
The following fields are displayed:
Table 1: X-Header Flags Profile
Parameter | Description |
---|---|
Name | Specifies the unique name of the XHeader profile. The field supports up to 23 characters. |
X-Header Flags | |
| Specifies whether the ISUP messages with SUSPEND message type should be interworked to the SIP side or not. The options are:
|
| Specifies whether the INFO messages with SUSPEND message type should be interworked to the ISUP side or not. The options are:
|
| Specifies whether the ISUP messages with RESUME message type should be interworked to the SIP side or not. The options are:
|
| Specifies whether the INFO messages with RESUME message type should be interworked to the ISUP side or not. The options are:
|
| Specifies whether the ISUP messages with CONFUSION message type should be interworked to the SIP side or not. The options are:
|
| Specifies whether the INFO messages with CONFUSION message type should be inter worked to the ISUP side or not. The options are:
|
Make the required changes to the required fields and click Save to save the changes. The copied XHeader Profile is displayed at the bottom of the original XHeader Profile in the XHeader Profile List panel.
To Delete XHeader Profile
To delete any of the created XHeader Profile, click the radio button next to the specific XHeader Profile which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click OK to remove the specific XHeader Profile from the list.