Command Syntax
> show table profiles ipSignalingPeerGroup
Command Parameters
IP Signaling Peer Group Parameters
| Parameter | Description |
|---|---|
name | IP Signaling Peer Group name |
description | Customized description of this IP Signaling Peer Group. |
sendAllIpAddressAndFqdn | If set to 'enable', the SBC sends all IP addresses and FQDNs for the IP Signaling Peer Group in a single policy response. |
sequence | A unique sequence number for each IP Peer belonging to this IP Signaling Peer Group. |
serviceStatus | Default is 'outOfService'. If set to 'inService', this IP peer is used. |
ipAddress | IP address of this IP peer. |
ipPort | TCP/UDP port for this IP peer. |
fqdn | FQDN to use for sending egress calls/requests to this IP peer. |
fqdnPort | Port number for FQDN. (range: 0-65535 / default = 0) |
Overview
Content Tools