In this section:
The object describes the priority of Rph value which is sent from the configured Egress leg.
To View Rph Emergency Matching Config
On SBC main screen, go to All > Profiles > Services > SIP Resource Priority Header Profile > Send Egress Rph For Emergency.
Select the desired Sip Resource Priority Header Profile from the drop-down list to view/edit the Send Egress Rph For Emergency parameters.
The Send Egress Rph For Emergency window is displayed.
Figure 1: Send Egress Rph for Emergency
To Edit Rph Emergency Matching Config
To edit any of the Send Egress Rph For Emergency in the list, click the radio button next to the specific Send Egress Rph For Emergency name.
The Edit Selected Send Egress Rph For Emergency window is displayed below.
You would not be able to edit as the fields are read-only.
To Create Send Egress Rph For Emergency
To create a new Send Egress Rph For Emergency, click Send Egress Rph For Emergency tab on the Send Egress Rph For Emergency List panel.
The Create New Send Egress Rph For Emergency window is displayed.
The following fields are displayed:
Table 1: Send Egress Rph for Emergency Parameters
Parameter | Description |
|---|---|
Egress Namespace | Specifies the namespace associated with the r-value (alphanumeric string with a maximum size of 31 characters). |
Egress R-priority | Specifies the priority associated with the r-value. (alphanumeric string with a maximum size of 31 characters). |
To Delete Send Egress Rph For Emergency
To delete any of the created Send Egress Rph For Emergency, click the radio button next to the specific Send Egress Rph For Emergency which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Send Egress Rph For Emergency from the list.
Overview
Content Tools