In this section:
Headers may be configured in compact form and transparently passed using a Transparency Profile. It is advisable to configure both compact and long formats to ensure both types of received headers in the PDU are transparently passed.
IMPORTANT
Ribbon recommends using the Transparency Profile to configure transparency on the SBC Core for new deployments, as well as applying additional transparency configurations to existing deployments. Do not use IP Signaling Profile flags in these scenarios because the flags will be retired in upcoming releases.
Refer to the SBC SIP Transparency Implementation Guide for additional information.
Refer to SBC SIP Transparency Implementation Guide for additional transparency details..
To View Transparency Profile
On SBC main screen, go to Configuration > Profile Management > Category: Service Profiles > Transparency Profile.
The Transparency Profile window is displayed.
Figure 1: Profile Management - Service Profiles - Transparency Profile
To Edit Transparency Profile
To edit any of the Transparency Profile in the list, click the radio button next to the specific Transparency Profile name.
The Edit Selected Transparency Profile window is displayed below.
Figure 2: Profile Management - Service Profiles - Transparency Profile
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Transparency Profile
To create a new Transparency Profile, click New Transparency Profile tab on the Transparency Profile List panel.
Figure 3: Profile Management - Service Profiles - Transparency Profile Fields
The Create New Transparency Profile window is displayed.
Figure 4: Profile Management - Service Profiles - Transparency Profile Create Window
The following fields are displayed:
Table 1: Transparency Profile Parameters
Parameter | Description |
|---|---|
| This profile contains a list of SIP headers to pass transparently, if configured. Specifies the name of this SIP Transparency Profile. The value ranges up to 23 characters. |
| Specifies the state of the SIP Transparency Profile. The options are:
|
To Delete Transparency Profile
To delete any of the created Transparency Profile, click the radio button next to the specific Transparency Profile which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Transparency Profile from the list.
Overview
Content Tools