Use this object to define signaling and media Quality of Experience (QoE) configuration.

Note

As a best practice, always use UPPERCASE for trunk group names.

Command Syntax

% set addressContext <name> zone <name> sipTrunkGroup <name> qoe
	asr
		criticalQosAsrLimit <0-70>
		defaultQosAsr <0-100>
		majorQosAsrLimit <0-90>
	clu 
		criticalQosCluLimit <80-100>
	minTimeToProceed <60-3600>
	pgrd 
		criticalQosPgrdLimit <50-10000>
		defaultPgrdFactor <50-10000>
	rfactor
		criticalQosRfactorLimit <0-100>
		majorQosRfactorLimit <0-100>
	scru
		criticalQosScruLimit <80-100>

Command Parameters

SIP Trunk Group QoE Parameters

ParameterLength/RangeDescription
asr N/AASR signaling quality measurement utilizing the following parameters.
  • criticalQosAsrLimit – The critical ASR limit below which call admission is stopped. (range: 0-70 / default = 40).
  • defaultQosAsr – Default value used by ASR when no calls are made during a sampling period (range: 0-100 / default = 90).
  • majorQosAsrLimit – The major ASR limit below which call admission is reduced. (range: 0-90 / default = 70).
cluN/ACall Limit Utilization (CLI) signaling quality measurement.
  • criticalQosCluLimit – Critical limit (in percentage) above which all calls are dropped on specified peer/trunk group. (range: 80-100 / default =   80).
minTimeToProceed 60-3600The minimum time period (in seconds) before call admission starts after any trunk group KPI falls below the critical threshold. (default = 60).
pgrdN/APost Gateway Ringing Delay (PGRD) signaling quality measurement.
  • criticalQosPgrdLimit – The critical PGRD limit (in milliseconds) above which the call admission is stopped. (range: 50-10000 / default = 1000).
  • defaultPgrdFactor – Default value to be used as PGRD when no call are made for a sampling period. (range: 50-10000 / default = 1000).
rfactorN/AR-Factor signaling quality measurement.
  • criticalQosRfactorLimit – The critical R-Factor limit below which call admission is stopped. (range: 0-100 / default = 50).
  • majorQosRfactorLimit – The major R-Factor limit below which call admission is reduced. (range: 0-100 / default = 70).
scru N/ASustained Call Rate Utilization signaling quality measurement.
  • criticalQosScruLimit – Critical limit (in percentage) above which all calls are dropped on specified peer/trunk group. (range: 80-100 / default =   80)
  • No labels