In this section:

This object can be provisioned for various call processing entities and it includes many services currently supported on the SBC. Use the Class of Service screen to provision services that are common and shared among your SBC call processing entities.

To View Class Of Service

On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Class Of Service. The Class Of Service window is displayed.

Figure 1: Call Routing - Profiles - Class of Service

To Edit Class Of Service

To edit any of the Class Of Service in the list, click the radio button next to the specific Class Of Service name.

The Edit Selected Class Of Service window is displayed below.

Figure 2: Call Routing - Class of Service Edit

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Class Of Service

To create a new Class Of Service, click New Class Of Service tab on the Class Of Service List panel.

The Create New Class Of Service window is displayed.

Figure 3: Call Routing - Class of Service Create Window

The following fields are displayed:

Table 1: Class of Service Profile

Parameter Description
Name Specify the name of the class of service (CoS).
Non Subscriber Call Type Filter

Select the call type.

  • Private  
  • National Operator
  • Local Operator
  • National Type
  • International Type
  • International Operator
  • Long Distance Operator
  • IP VPN Service  
  • Test
  • Transit
  • Carrier Cut Through  
  • Other Carrier Chosen
  • User Name  
  • Mobile

To Delete Class Of Service

To delete any of the created Class Of Service, click the radio button next to the specific Class Of Service which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific Class Of Service from the list.


  • No labels