In this section:

Related articles:

Use the Call Param Filter Group Profile window to group a set of Call Parameter Filter Profiles into a single entity so that multiple profiles are applied. Call Parameter Filter Profiles contain profile data that is used to query the local stored Active Directory (AD) data. For the profiles within the group that successfully match, the SBC retrieves AD attributes that can be used in number manipulation, call routing, and policy processing. Refer to Flexible AD Support for ERE for more information on configuring the SBC to retrieve and store subscriber data from an AD server. 

To View Call Param Filter Group Profiles

On the SBC main screen, go to All > Profiles > Call Param Filter Group Profile. The Call Param Filter Group Profile window opens.

Figure 1: Call Param Filter Group Profile

To Create a Call Param Filter Group Profile

To create a new Call Param Filter Group Profile:

  1. Click New Call Param Filter Group Profile. The Create New Call Param Filter Group Profile window opens.

  2. Use the following table to specify general parameters for the group profile and specify the first profile to include in the group in the Call Param Filter Group Profile Data section. 
    Table 1: Call Param Filter Group Profile Parameters

    ParameterDescription
    NameName for the profile
    DescriptionDescription of the profile
    Call Param Filter Group Profile Data
    SequenceSequence number for the profile data object
    Call Param Filter ProfileSpecify the Call Parameter Filter Profile to include in the group. The list contains the names of the existing list of Call Parameter Filter Profiles.
  3. Click Save. To add additional Call Parameter Filter Profiles within the group profile, go to Call Param Filter Group Profile Data.