This object sets the preferred Time Zone for SBC.

During the installation process, the NTP server and time zone information is input to the Active server only. Once the Standby server starts, this information is synced from the Active to Standby.


Note

The SBC supports up to three NTP servers. 

The SBC should receive an initial time synchronization from NTP server before accepting calls.

To View Ntp - Time Zone

On the SBC main screen, go to Configuration > System Setup > Ntp > Time Zone. The Time Zone window is displayed.

Figure 1: Ntp - Time Zone


To Edit Ntp - Time Zone

To edit any of the Time Zones in the list, click the radio button next to the specific Time Zone name.

The Edit Selected Time Zone window is displayed below.

Figure 2: Ntp - Time Zone Edit


Make the required changes and click Save to save the changes.

The following fields are displayed:

Table 1: Time Zone

Parameter

Description

Name Specifies the name of the System.
Zone

Specifies the time zone under which the  SBC node is present. For a list all the time zones, refer to Time Zones.

  • No labels