In this section:

The SBC Core supports forking of media streams to a Media Capture Tool (MCT). The criteria for recording calls is configured in the PSX and when a call meets the criteria the PSX indicates the need for media forking in the Policy Response sent to the SBC. This object allows you to configure the MCT server where the captured media is sent.

Access to the Media Capture Tool is restricted to privileged, password-protected user accounts. Tracking of its use is tracked by AUD logging.

To View the MCT List

On the SBC main screen, go to Troubleshooting > Call Trace/Logs/Monitors > Monitor Configuration > Monitor Endpoint > MCT or
All > Global > Monitor Endpoint > MCT

The MCT window is displayed.

Figure 1: Troubleshooting - Monitor Endpoint - MCT List

To Create an MCT

To create a new MCT object:

Click New MCT on the MCT List window to open the Create New MCT window.

Figure 2: Create New MCT window

 

Use the following table to configure the options and then click Save.

Table 1: MCT Parameters

Parameter

Description

Name

Specifies the name of the MCT.

Trunk Group

Specifies the name of the trunk group used by the Media Capture Tool (MCT).

IP Address

Specifies the logical IP address of the interface.

Port Number

Specifies the UDP/TCP port number of the SIP signaling oort. Default is 5060.

State

Specifies the administrative state of the Media Capture Tool.

The options are:

  • Disabled (default)
  • Enabled

To Edit an MCT

To edit an MCT object:

  1. Select the MCT from the MCT List window by clicking the radio button next to it. The Edit Selected MCT window is displayed.
  2. Make necessary changes and click Save to save the changes. 

To Copy an MCT 

To copy an MCT object: 

  1. Select the MCT from the MCT List window by clicking the radio button next to it.
  2. Click Copy MCT on the MCT List window. The Copy Selected MCT window is displayed.
  3. Make necessary changes and click Save to save the changes. Click Undo Edits to cancel all changes.

To Delete an MCT

To delete an MCT object: 

  1. Click the delete (X) symbol at the right of the row containing the server name that you want to delete. A dialog box pops up, asking for confirmation of deletion.
  2. Click Yes to confirm deletion when prompted. 
  3. Click Ok to complete the deletion process.


  • No labels