In this section:
Use the IP Signaling Peer Group object to configure an IP Signaling Peer Group containing a set of IP peers.
Command Syntax
% set profiles ipSignalingPeerGroup <peer_group_name> description <string> ipSignalingPeerGroupData <0-32000> sendAllIpAddressAndFQDN <disable | enable>
Command Parameters
The IP Signaling Peer Group Parameters are as shown below
Command Example
% set profiles ipSignalingPeerGroup SIPPeer-1 description "Peer group example" ipSignalingPeerGroupData 1 fqdn www.mysite.com fqdnPort 5066 ipAddress 10.22.33.44 serviceStatus inService % set profiles ipSignalingPeerGroup SIPPeer-1 sendAllIpAddressAndFQDN enable % show profiles ipSignalingPeerGroup sendAllIpAddressAndFQDN enable; ipSignalingPeerGroup SIPPeer-1 { description "Peer group example"; ipSignalingPeerGroupData 1 { serviceStatus inService; ipAddress 10.22.33.44; fqdn www.mysite.com; fqdnPort 5066; } }
Overview
Content Tools