This window displays memory utilization statistics for the 'n' number of intervals.
On the SBC main screen, go to Monitoring > System > Category: Hardware Status > Memory Util Interval Statistics. The Memory Util Interval Statistics window is displayed.
Figure 1: Memory Util Interval Statistics
The following fields are displayed:
Table 1: Memory Util Interval Statistics Parameters
| Parameter | Description |
|---|---|
Number | Sequence number which identifies the interval for which the set of statistics is required. |
Ce name | SBC node name. |
Interval Valid | A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
|
Int Time | The system up time when the interval statistics are collected. |
Average | The average memory utilization percentage for this interval. |
High | The high memory utilization percentage for this interval. |
Low | The low memory utilization percentage for this interval. |
Average Swap | The average swap memory utilization percentage for this interval. |
High Swap | The high swap memory utilization percentage for this interval. |
Low Swap | The low swap memory utilization percentage for this interval. |
By default, only ten entries are displayed in a view. Use the Show <number> entries drop-down box to select the number of entries to display.
Overview
Content Tools