In this section:
Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a H323 trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified H323 trunk group.
To View Ingress IP Prefixes
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323 Trunk Group > Ingress Ip Prefix. The Ingress IP Prefix window is displayed.
Use the drop-down lists to select the desired Address Context, Zone and H323 Trunk Group.
Figure 1: System Provisioning - Ingress Ip Prefix
To Create an Ingress IP Prefix
To create a new Ingress IP Prefix, click New Ingress IP Prefix. The Create New Ingress IP Prefix window is displayed.
Figure 2: System Provisioning - Ingress IP Prefix Create Window
Use the following table to enter values and click Save.
Table 1: System Provision - Ingress IP Prefix Parameters
Parameter | Description |
|---|---|
| IP Address | Specifies the IPv4 or IPv6 address of an ingress peer. Enter the address in the following format:
|
| Prefix Length | Specifies the number of bits in the address which form the network part of the IP address. The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 32. |
To Copy an Ingress IP Prefix
- To copy an Ingress IP Prefix, click the radio button next to the Ingress IP Prefix you want to copy.
- Click Copy Ingress IP Prefix. The Copy Selected Ingress IP Prefix window is displayed.
- Make any required changes and click Save.
To Delete an Ingress IP Prefix
- To delete an Ingress IP Prefix, click the radio button next to the specific Ingress IP Prefix which you want to delete.
- Click the X at the end of the row.
- Confirm the deletion when prompted.
Overview
Content Tools