For every Feature Control Profile created, you have the option to choose whether to use the Ip Protocols or not.

The Ip Protocol flag, can be enabled or disabled for each Feature Control Profile created.

To View and Edit Ip Protocol Flags

On SBC main screen, go to Configuration > Profile Management > Category: Feature Control Profile > Feature Control Profile > Ip Protocol Flags.

Select the desired Feature Control Profile from the drop-down list to view its respective Ip Protocol Flags parameters.

The Ip Protocol Flags window is displayed.

Figure 1: Profile Management - Feature Control Profile - Ip Protocol Flags

The following fields are displayed:

Table 1: Feature Control Profile - Ip Protocol Flags parameter

Parameter

Description

Use Ip Protocol

Specifies whether to use the Ip Protocol or not for the created Feature Control Profiles. The options are:

  • disable (default)
  • enable
Default Called User

This parameter is visible only when Use Ip Protocol parameter is enabled.

If enabled, the application User Name is used the Default Called User value. The options are:

  • disable (default)
  • enable
Honor Phone Context Parameter

When this flag is enabled, PSX globalizes the incoming called number using the phone-context value received in Called-URI. Once the number is globalized using phone-context, the PSX acts as if it received a global number in policy request and use the modified number for further call processing. 

The options are:

  • disable (default)
  • enable

This parameter is visible only when Use Ip Protocol parameter is enabled.


Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels