In this section:

Use this window to create or edit Forwarders Data for a ENUM Domain Name object. An ENUM Domain Name contains an initial set of Forwarders Data when it is created. You can add additional sets of Forwarders Data to an ENUM Domain Name object using this window.

To View Forwarders Data

On the SBC main screen, go to All > Global > Servers > Enum Domain Name > Forwarders Data. The Forwarders Data window opens showing all configured Forwarders data. Select a ENUM Domain Name to work with Forwarders Data for a specific ENUM Domain Name.

Figure 1: Forwarders Data

To Create Forwarders Data

To create new Forwarders Data:

Choose the ENUM Domain Name to which you want to add the Forwarders in the ENUM Domain Name list.

Click New Forwarders Data. The Create New Forwarders Data window is displayed.

Use the following table to enter values and click Save.

Table 1: Forwarders Data Parameters


Parameter


Description

Priority

Specifies the priority (order) of ENUM service execution. If this parameter is not set or set to the default of '129', default priorities are assigned for LNP (130), CNAM (131) and SIP AoR (132). If a different order of service execution is desired, set the priorities accordingly.

For example, setting CNAM priority to 133 executes SIP AoR before CNAM.

Forwarder IP ENUM server IPv4 or IPv6 address of this Forwarder IP entry.
Forwarder DescriptionTextual description for the forwarder IP address.
Percentage DistributionThis option is only available when Load Distribution is set to Proportion for the ENUM Domain Name to which you are adding this Forwarders Data. Based on this value, the percentage of load distribution for each IP address in Zone ID is calculated.
E DNS Type

Use this option to specify whether the ERE sends the eDNS OPT record. The options are:

If this flag is set to no, the ERE sends the query without the OPT record.

  • No - the ERE sends the query without the OPT record.
  • Yes (default) - the ERE sends the eDNS OPT record.
E DNS Buffer Size

Use this option to specify the E DNS buffer size used in the OPT record when the E DNS Type is set to Yes. If this parameter is configured as any value other than zero, the OPT record uses the value. Set this parameter to zero to have the OPT record use the global E DNS buffer size.

To Edit Forwarders Data

To edit Forwarders Data:

  1. Click the radio button next to the specific Forwarders Data in the list. The Edit Selected Forwarders Data window opens.
  2. Make the required changes and click Save.

To Copy Forwarders Data

To copy Forwarders Data:

  1. Click the radio button next to the specific Forwarders Data in the list.
  2. Click Copy Forwarders Data. The Copy Selected Forwarders Data window opens.
  3. Make any required changes and click Save.

To Delete Forwarders Data

To delete Forwarders Data:

  1. Click the radio button next to the specific Forwarders Data in the list.
  2. Click the X at the end of the row. 
  3. Confirm the deletion when prompted.


  • No labels