To learn more about the various methods of controlling transport protocols for SIP signaling and how these work together, refer to Controlling SBC Core Transport Protocols for SIP Signaling.


In this section:

Use this object to set up to four transport parameter types

To View and Edit Transport

On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Transport. The Transport window is displayed.

On the Transport window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Transport for H323 Trunk Group.

Figure 1: Trunk Provisioning - Egress Ip Attributes H323 Transport

There are no Transport parameters for DEFAULT_H323 type of Egress Ip Attributes.

DEFAULT_SIP

On the Transport window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Transport for SIP Trunk Group.

Figure 2: Trunk Provisioning - Egress Ip Attributes SIP Transport

The following fields are displayed:

Table 1: Egress Ip Attributes Transport Parameters

Parameter

Description

 Type1

Transport parameter type1. The options are:

  • None (default)
  • Sctp
  • Tcp
  • Tls Over Tcp
  • Udp
 Type2 

Transport parameter type2. The options are:

  • None (default)
  • Sctp
  • Tcp
  • Tls Over Tcp
  • udp
 Type3 

Transport parameter type3. The options are:

  • None (default)
  • Sctp
  • Tcp
  • Tls Over Tcp
  • Udp
 Type4 

Transport parameter type4. The options are:

  • None (default)
  • Sctp
  • Tcp
  • Tls Over Tcp
  • Udp

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels