This object controls the scenarios where there are two policy request/policy response sequences per call.
To View and Edit Ip Double Dip Controls Flags
On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Ip Double Dip Controls Flags.
Select the desired Signaling Profile from the drop-down list to view its respective Ip Double Dip Controls Flags parameters.
The Ip Double Dip Controls Flags window is displayed.
Figure 1: Signaling Profiles - Signaling Profile - Egress - Cft
The following fields are displayed:
Table 1: Signaling Profile - Egress - Ip Double Dip Control Flags parameters
| Parameter | Description |
|---|---|
Called Number From Alt Called Number | When selected, the alternate called number (the called number with a prefix added in response to Auto Recall Prefix Profile processing) is copied to the called number in the policy response. |
Restore Ingress Numbers Except Translated Numbers | When selected, the PES process restores all numbers except translated numbers to the ones received in the policy request or SIP INVITE message before including them in the response to the originating gateway during the first PSX lookup. |
Restore Translated Numbers | When selected, the PES process restores translated numbers to the ones received in the policy request or SIP INVITE message before including them in the response to the originating gateway during the first PSX lookup. |
Skip Egress Trunk Grp Processing | When selected, PES skips any processing on the first dip that changes numbers during or after the PSX post-router phase. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools