In this section:
This object is used to define rules for standard digit manipulation (DM), Dialed Number Identification Service (DNIS) digit manipulation, and parameter manipulation (PM).
To View Dm Pm Rule
On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Digit Parameter Handling > Dm Pm Rule. The Dm Pm Rule window is displayed.
Figure 1: Call Routing - Profiles - Dm Pm Rule
To Edit Dm Pm Rule
To edit any of the Dm Pm Rule in the list, click the radio button next to the specific Dm Pm Rule name.
The Edit Selected Dm Pm Rule window is displayed below. You would not be able to edit any of the fields as the fields are read only.
To Create Dm Pm Rule
To create a new Dm Pm Rule, click New Dm Pm Rule tab on the Dm Pm Rule List panel.
Figure 2: Call Routing - Dm Pm Rule Fields
The Create New Dm Pm Rule window is displayed.
Figure 3: Call Routing - Dm Pm Rule Create Window
The following fields are displayed:
Table 1: DM PM Rule Parameters
| Parameter | Description |
|---|---|
| Name | The name of this DM/PM (digit manipulation/parameter manipulation) rule, up to 23 characters. |
| Sub Rule | |
Priority | Set the priority level. |
Criteria | Select the criteria type from the drop-down list. |
Rule Type | Select Digit Manipulation, Parameter Manipulation, or URI manipulation to set criteria for performing digit, parameter, or URI manipulation. |
| Digit Manipulation | |
| Number Type | Specify the number type:
|
| Number Parameter Manipulation | |
| Nature of Address | Specifies the Nature Of Address:
|
| Numbering Plan Indicator | Specifies the numbering plan Indicator. data | ignore | isdn | none | offsetUnused | private | spare0Unknown | spare1 | spare2 | spare3 | spare4 | spare5 | spare6 | spare7 | telephony | telex |
| Number Length | Specify how to match the Number Length criteria with the specified value (in value field):
|
| Presentation | Select the presentation criteria:
|
| Screening | Network screening indicator of calling party number. Options include:
|
| Include in Egress | Select the Include In Egress criteria:
|
| Digit String Manipulation | |
| Start Digit Position | The first position within the complete number specified in Digit Type field to start the comparison with value specified in the Match Value field. The start digit position 0 is the left-most digit of the complete number. (range: 0-2147483647 / default = 0). |
| Number of Digits | Total number of digits to use for comparison. For example, if the start digit position is 0 and the number of digits specified is 3, reading from left to right, the ERE would use the first, second, and third digits of the complete number for the comparison. (range: 0-2147483647 / default = 0). |
| Action | The action to take when the matching criteria is met (used for international gateway support involving setting NOA to ‘International’ and adding country code):
|
| Replacement | |
| Type | Specifies the type of replacement:
|
| Digit String | Digit/parameter type to apply this DM/PM Criteria. <252 | 253 | 254 | billingNumber (default) |
| Start Digit Position | The first position within the complete number specified in Digit Type field to start the comparison with value specified in the Match Value field. The start digit position 0 is the left-most digit of the complete number. (range: 0-2147483647 / default = 0). |
| Number of Digits | Total number of digits to use for comparison. For example, if the start digit position is 0 and the number of digits specified is 3, reading from left to right, the ERE would use the first, second, and third digits of the complete number for the comparison. (range: 0-2147483647 / default = 0). |
| Value | The value to use for matching |
To Delete Dm Pm Rule
To delete any of the created Dm Pm Rule, click the radio button next to the specific Dm Pm Rule which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Dm Pm Rule from the list.
Overview
Content Tools