The BMC web application allows provisioning of NTP server.


Note

The SBC supports up to three NTP servers. 

The following procedure describes how to configure the NTP server using BMC:

  1. Log on to the SBC BMC using the IP address configured in the previous section.

    The SBC BMC Main window is displayed:

  2. Click Configuration > NTP and Date Time Settings.

    NTP and Data Time Settings Option


    The NTP Settings window is displayed.

    BMC NTP Server Settings Window

  3. Select Automatically synchronize Date & Time with NTP Server option.

  4. Enter the Primary NTP Server and Secondary NTP Server (not mandatory) IP addresses.

    NTP Server Settings Contd

  5. Click Save.

The NTP Server IP is synchronized to the SBC server. The same IP address displays in the Install Software section of EMA.