In this section:
Overview
At a high level, the functions performed by the ATCF are:
- The ATCF is a function in the serving (visited if roaming) network. When SRVCC enhanced with ATCF, the ATCF is included in the session control plane for the duration of the call before and after access transfer. The ATCF may be co-located with one of the existing functional entities within the serving network (that is, P-CSCF or IBCF).
- Allocates an STN-SR.
- Includes itself for the SIP sessions.
- Instructs the ATGW to anchor the media path for originating and terminating sessions.
- Keeps track of sessions (either in pre-alerting state, alerting state, active, or held) to perform access transfer of the selected session.
- Performs the access transfer and updates the ATGW with the new media path for the (for example, CS) access leg, without requiring updating the remote leg.
- After Access Transfer, updates the SCC AS that access transfer has taken place to ensure that T-ADS have the information on the currently used access.
- Handles failure cases during the access transfer.
IMPORTANT
Ribbon recommends using the Transparency Profile to configure transparency on the SBC Core for new deployments, as well as applying additional transparency configurations to existing deployments. Do not use IP Signaling Profile flags in these scenarios because the flags will be retired in upcoming releases.
Refer to the SBC SIP Transparency Implementation Guide for additional information.
Deployment Scenarios
Figure 1: SBC IMS Deployment - A-SBC as ATCF Provisioning
Call Flow
Registration Call Flow
Figure 2: Registration Call Flow
The call flow description for Figure 2 is as follows:
- The Ribbon SBC, acting as an A-SBC and ATCF, receives REGISTER request from UE.
- The SBC processes the REGISTER request and based on the local configuration applies ATCF procedures for REGISTER. It adds all the ATCF specific parameters (Feature-Caps header with
g.3gpp.atcf,g.3gpp.atcf-mgmt-uri, andg.3gpp.atcf-pathparameters) to the REGISTER. It also inserts a Path header pointing to itself as a part of ATCF procedures. - The SBC acting as a B2BUA, changes Contact header to point itself and forwards the REGISTER request towards P-CSCF.
- P-CSCF forwards REGISTER towards I/S-CSCF.
- I/S-CSCF responds to the REGISTER with 200 OK.
- P-CSCF forwards 200 OK response (to REGISTER) towards the SBC, acting as an A-SBC and ATCF.
- The SBC stores the Path and Service-Route headers and forwards these headers transparently towards UE. It also inserts a Feature-Caps header field with g.3gpp.atcf feature-capability indicator containing the STN-SR allocated to ATCF.
- SCC AS sends MESSAGE request towards the SBC/ATCF’s Management URI (sent in Feature-Caps header while forwarding REGISTER request). The MESSAGE contains application/vnd.3gpp.SRVCC-info+xml. The message contains
- ATU-STI for PS to CS SRVCC
- b) C-MSISDN
- The SBC acting as ATCF, processes MESSAGE request and binds the information present in the message-body against registration control block for that UE.
The authentication challenge procedures are not shown in this call-flow for brevity.
PS to CS SRVCC for UE originated Call Flow
Figure 3: PS to CS SRVCC for UE originated Call Flow
The call flow description for Figure 3 is as follows:
- The initial call is established over LTE access between UE-A and UE-B. The signaling and media are anchored at the A-SBC/ATCF.
- UE-A moves to CS domain and attaches itself to CS domain.
- The MSC that is attached to the UE, sends an INVITE request with STN-SR in Request-URI towards ATCF to initiate PS to CS handover. The INVITE request contains C-MSISDN in P-Asserted-Identity header.
- After receiving an INVITE with STN-SR (that is, a PS to CS handover request), the SBC/ATCF uses C-MSISDN to derive the UE’s identity and the associated session.
- It allocates port towards MSC server and switches the media-ports towards MSC server.
- It sends 200 OK towards MSC Server.
- MSC Server responds with ACK. With this, the handover is completed and the media path is established towards the UE through MSC server that is, CS domain.
- The SBC/ATCF establishes a new dialog with the SCC AS through I-CSCF by sending a new SIP INVITE request to the SCC AS using the stored ATU-STI for PS to CS SRVCC.
The INVITE request contains:- SDP offer containing the currently used media with ATGW ports and IP addresses towards the remote UE as provided by the ATGW. The ATCF only includes the media of the media types in the SDP offer. The media types are offered in the received SIP INVITE request due to STN-SR.
- Request-URI containing the ATU-STI for PS to CS SRVCC previously received from the SCC AS and associated with the session being transferred.
- Target-Dialog header field with the dialog identifier of the session that is transferred.
- I-CSCF forwards the INVITE to SCC AS.
- SCC AS responds with 200 OK to INVITE.
- I-CSCF forwards the 200 OK to INVITE to the SBC/ATCF.
In the remaining steps, SCC AS clears the old access leg established over LTE access.
Configuration
- Global Configuration
- Configuring SBC Towards UE
- Configuring SBC Towards IMS Core with an External P-CSCF
- Configuring SBC Towards IBCF
- Configuring SBC Towards MSC
Global Configuration
- ATCF Configuration
- Trunk Group Towards UE
- IPsec Support for SBC Only Mode
- Precondition Support
- MSRP Support
- Attaching ATCF Profile to IPSP
ATCF Configuration
set global signaling srvcc stnSr +1-237-555-3333 atcfUri atcf.visisted2.net callLingerTimer 32
Trunk Group Towards UE
set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE signaling registration requireRegistration required-nonpriority useRUriForRegisterRouting enabled set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE signaling prefRequireTransparency "enabled" deRegParentWithChildDereg "enabled" validateAor "enabled" condIncMethInAllowHdr "enabled" usePsxRouteForEmergencyCall "enabled" set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE callRouting useRouteSet rcbNextHopAndStored set profiles signaling ipSignalingProfile IPSP_PCSCF egressIpAttributes privacy transparency enable
IPsec Support for SBC Only Mode
set profiles services sipSecurityProfile IPSEC_SBC sbxSecMode sbc-only set profiles services sipSecurityProfile IPSEC_SBC sipSecurityMechanism ipsec-3gpp precedence 1 commit set addressContext default ipInterfaceGroup LIG1 ipsec enabled commit set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE services sipSecurityProfile IPSEC_SBC commit set addressContext default ipsec spd spd1 action bypass localIpAddr 10.54.54.27 localIpPrefixLen 32 localPort 5060 precedence 10 state enabled set addressContext default ipsec spd spd2 action bypass localIpAddr 10.54.54.27 localIpPrefixLen 32 localPort 5061 precedence 11 state enabled commit
Precondition Support
set addressContext default zone ZONE_CORENW sipTrunkGroup TG_TOWARDS_IMSCORE services preconditions transparent set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE services preconditions transparent commit
MSRP Support
set profiles media packetServiceProfile DEFAULT videoCalls maxVideoBandwith 50000 commit set addressContext default zone ZONE_CORENW sipTrunkGroup TG_TOWARDS_IMSCORE media msrp enabled commit set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE media msrp enabled commit set system media dedicatedBWForNonRTPMedia 50 commit
Attaching ATCF Profile to IPSP
Select "ATCF" profile from the "Access Transfer Policy Type" option.
Figure 4: Selecting ATCF Profile
Attach the ATCF profile to the Ip signaling profile of a Trunk Group.
Figure 5: Attaching ATCF profile to the IPSP Trunk Group
Configuring SBC Towards UE
The following profiles are configured:
Transparency Profile
set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader To set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader From set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Path set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Accept set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Reason set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Server set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Warning set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Call-Info set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Alert-Info set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Error-Info set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader User-Agent set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Referred-By excludedMethods register,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Request-URI set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader Accept-Language set profiles services transparencyProfile TRANS_PROF_ACCESS sipHeader P-Called-Party-Id commit set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/rlmi+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody message/external-body set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/cpim-pidf+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/pidf-diff+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/dialog-info+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/simple-filter+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/resource-lists+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/conference-info+xml set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/simple-message-summary set profiles services transparencyProfile TRANS_PROF_ACCESS sipMessageBody application/vnd.3gpp.srvcc-ext ignoreTransparency yes commit set profiles services transparencyProfile TRANS_PROF_ACCESS state enabled commit set addressContext default zone ZONE_ACCESSNW sipTrunkGroup TG_TOWARDS_UE services transparencyProfile TRANS_PROF_ACCESS commit
Zone Index Profile
The following fields must be configured:
- Zone Index Profile
- Description
- Zone Index
Figure 6: PSX Zone Index Profile
Ip Signaling Profile
The following parameters must be configured under "Ip Signaling Profile".
Common IP Attributes
The following "Common IP Attributes" must be enabled in PSX under "IP SIGNALING PROFILE":
No Port Number 5060
Reject REFER
ReQuery PSX on REGISTER Refresh
Disable Host Translation
End to End BYE
End to End re-INVITE
End to End UPDATE
Store P-Charging-Vector
Validate Access Nw Info Header
- Insert UE Flow Info
Figure 7: PSX IPSP-Common IP Attributes
Relay Flags
The following "Relay Flags" must be enabled under "Ip Signaling profile":
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer To Header Relay option.
Figure 8: PSX IPSP-Relay Flags
Transparency Flags
The following "Transparency Flags" must be enabled under "Ip Signaling profile":
- Contact Header*
Figure 9: PSX IPSP-Transparency Flags
Egress IP Attributes
The following "Egress IP Attributes" must be enabled:
- Select SIP Only from IP Protocol Type.
- Select BCI Interwork Encountered from BCI option.
- Select Transparency from Privacy option.
- Select Merge Received Contacts with Existing Contacts from Redirect option.
- Select Include None from Include Charge Information (under SIP Headers and Parameters option).
- Select None from SIP TO Header Mapping from SIP Headers and Parameters option.
- Select Include OLIP from Flags (under SIP Headers And Parameters option).
- Select Transparency For Destination Trunk Group Parameter from Flags (under SIP Headers And Parameters option).
- Select End To End Ack from Flags (under SIP Headers And Parameters option).
- Select Diversion from Call Forwarding (under SIP Headers And Parameters option).
Figure 10: PSX IPSP-Egress Ip Attributes
Ingress IP Attributes
The following "Ingress IP Attributes" must be enabled:
- 181 Supported (under Flags option)
Figure 11: PSX IPSP Ingress IP Attributes
Sip Trunk Group
The following profiles/fields must be enabled:
- Zone Index Profile
- IP Signaling Profile
- Feature Control Profile
- Signaling Profile
- SIP Domain
- IP Version Preference
- Use IPTG Routing (Hop By Hop Routing) For Ingress (Ingress > Flags)
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- IP Peer Supported (Egress > IPTG)
- Egress IP Signaling Profile (Egress > IPTG)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
- Select Services as Not Screened.
Figure 12: PSX Trunk Group (towards UE)
Configuring SBC Towards IMS Core with an External P-CSCF
The following profiles are configured:
Transparency Profile
set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader To set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader From set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Path set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Accept set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Reason set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Server set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Warning set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Call-Info set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Alert-Info set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Error-Info set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader User-Agent set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Referred-By excludedMethods register,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Request-URI set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Accept-Language set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader P-Called-Party-Id set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Require set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Proxy-Require set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Security-Client set profiles services transparencyProfile TRANS_PROF_CORENW sipHeader Security-Verify commit set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/pidf+xml excludedMethods register,invite,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/rlmi+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody message/external-body set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/cpim-pidf+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/pidf-diff+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/dialog-info+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/simple-filter+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/resource-lists+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/conference-info+xml set profiles services transparencyProfile TRANS_PROF_CORENW sipMessageBody application/simple-message-summary commit set profiles services transparencyProfile TRANS_PROF_CORENW state enabled commit set addressContext default zone ZONE_CORENW sipTrunkGroup TG_TOWARDS_CORENW services transparencyProfile TRANS_PROF_CORENW commit
Zone Index Profile
The following fields must be configured:
- Zone Index Profile
- Description
- Zone Index
Figure 13: PSX Zone Index Profile
Ip Signaling Profile
Common Ip Attributes
The following "Common IP Attributes" must be enabled in PSX under "IP SIGNALING PROFILE":
- Add P-Charging-Function Addr
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Customized Session Timer Behavior
- Disable Host Translation
- End to End BYE
- End to End re-INVITE
- End to End UPDATE
- End to End PRACK
- Enable Dial String Handling
- No Port Number 5060
- P-Called-Party-Id-Support
- Restrict History Info Header
- Store P-Charging Vector
- Store Service-Route Header
- Validate Access Nw Info Header
- Insert UE Flow Info
Figure 14: PSX IPSP-Common IP Attributes
Relay Flags
The following "Relay Flags" must be enabled under "Ip Signaling profile":
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer To Header Relay option.
Figure 15: PSX IPSP-Common IP Attributes-Relay Flags
Egress Ip Attributes
The following "Egress IP Attributes" must be enabled:
- Select SIP Only from IP Protocol Type option.
- Select Transit PAI From Unregistered Peer from Flags.
- Select Use IP Signaling Peer Domain In R-URI from Domain Name option.
- Select Include npdi from NPDI Options (under Number Portability Attributes option).
- Select P-Preferred-ID from Privacy Information (under Privacy option).
- Select Merge Received Contacts with Existing Contacts (under Redirect)
- Select Include None from Include Charge Information (under SIP Headers and Parameters option).
- Select Not Send from Session-Expires Refresher (under SIP Headers and Parameters option).
- Select None from SIP TO Header Mapping (under SIP Headers and Parameters option).
- Select Transparency For Destination Trunk Group Parameter from Flags (under SIP Headers and Parameters option).
- Select End To End Ack from Flags (under SIP Headers and Parameters option).
- Select Diversion from Call Forwarding (under SIP Headers and Parameters).
- Select Retry Without ETS from the Action For ETS 400 Responses With 417 Reason Code drop-down box (under SIP RPH ETS).
- Set ETS Default Priority Value as 0 (under SIP RPH ETS).
Figure 16: PSX IPSP-Common IP Attributes-Egress IP Attributes
Sip Trunk Group
The following profiles/fields must be enabled:
- Zone Index Profile
- IP Signaling Profile
- Feature Control Profile
- Signaling Profile
- SIP Domain
- IP Version Preference
- Use IPTG Routing (Hop By Hop Routing) For Ingress (Ingress > Flags)
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- IP Peer Supported (Egress > IPTG)
- Egress IP Signaling Profile (Egress > IPTG)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
- Select Services as Not Screened.
Figure 17: PSX Sip Trunk Group towards IMS Core
Configuring SBC Towards IBCF
The following profiles are configured:
- Transparency Profile
- Zone Index profile
- PSX Route URI Based Routing
- Ip Signaling Profile
- Sip Trunk Group
Transparency Profile
request system security generateSipHeaderEncryptionKeys set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Path set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Service-Route set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Feature-Caps set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Accept-Contact set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Alert-Info set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Contact set profile services transparencyProfile TRANS_PROF_IBCF sipHeader WWW-Authenticate set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Error-Info set profile services transparencyProfile TRANS_PROF_IBCF sipHeader From set profile services transparencyProfile TRANS_PROF_IBCF sipHeader History-Info set profile services transparencyProfile TRANS_PROF_IBCF sipHeader P-Called-Party-ID set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Reason set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Referred-By set profile services transparencyProfile TRANS_PROF_IBCF sipHeader To set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Accept set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Call-Info set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Warning set profile services transparencyProfile TRANS_PROF_IBCF sipHeader User-Agent set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Server set profile services transparencyProfile TRANS_PROF_IBCF sipHeader Accept-Language commit set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/pidf+xml excludedMethods register,invite,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/rlmi+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody message/external-body set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/cpim-pidf+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/pidf-diff+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/dialog-info+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/simple-filter+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/resource-lists+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/conference-info+xml set profiles services transparencyProfile TRANS_PROF_IBCF sipMessageBody application/simple-message-summary commit set profiles services transparencyProfile TRANS_PROF_IBCF state enabled commit set addressContext default zone ZONE_IBCF sipTrunkGroup TG_TOWARDS_IBCF services transparencyProfile TRANS_PROF_IBCF commit
Zone Index profile
Configuration Towards Peer in External:
set addressContext default zone ZONE_CORENW id 5 sipSigPort 1 ipInterfaceGroupName LIG3 ipAddressV4 10.4.8.18 ipAddressV6 fd00:10:6b50:248f::c portNumber 5060 transportProtocolsAllowed sip-tcp,sip-udp,sip-tls-tcp,sip-sctp mode inService state enabled set addressContext default zone ZONE_CORENW dialogTransparency enabled
The following fields must be configured:
- Zone Index Profile
- Description
- Zone Index
Figure 18: PSX IPSP Zone Index Profile
PSX Route URI Based Routing
The following flags must be configured:
- Create a Feature Profile.
Enable Perform Route Header Based Routing.
Figure 19: Route Header Based Routing
On the SIP Trunk Group, select the mapped Feature Control Profile and IP Signaling Profile.
Figure 20: Ingress SIP TG
- Create Call Parameter Filter Profile and set the values for:
- Type as "Regex Group."
- Variable Type as "Route URI Host Part."
Configure RouteURI as matching Regex String.
Figure 21: Call Parameter Filter Profile
- Type as "Regex Group."
- Create Policy Profile.
- Enable URI and URI Action as "Override IP Peer with Route URI Host Part".
Map the created Call Parameter Filter Profile.
Figure 22: Policy Profile
Map the Policy Profile under Policy Profile Group.
Figure 23: Policy Profile Group
On the SIP Trunk Group under Egress, select the Output Policy Profile Group.
Figure 24: Egress SIP TG
For domain based configuration, select UserName Routing.
Select the already mapped Call Parameter Filter Profile and Domain Name from the drop-down menu.
Figure 25: Username Routing
IP Signaling Profile
Common Ip Attributes
The following "Common IP Attributes" must be enabled in PSX under "IP SIGNALING PROFILE":
- Add P-Charging-Function Addr
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Create Path Header
- Customized Session Timer Behavior
- Disable Host Translation
- End to End BYE
- End to End re-INVITE
- End to End UPDATE
- End to End PRACK
- Enable Dial String Handling
- No Port Number 5060
- P-Called-Party-Id-Support
- Restrict History Info Header
- Store P-Charging Vector
- Store Service-Route Header
- Validate Access Nw Info Header
Figure 26: PSX IPSP Common Ip Attributes
Relay Flags
The following "Relay Flags" must be enabled under "Ip Signaling profile":
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer To Header Relay option.
Figure 27: PSX IPSP Common Ip Attributes Relay Flags
Egress Ip Attributes
The following "Egress IP Attributes" must be enabled:
- Select SIP Only from IP Protocol Type.
- Select Transit PAI From Unregistered Peer from Flags.
- Select Use IP Signaling Peer Domain In R-URI from Domain Name option.
- Select Include npdi from NPDI Options from Number Portability Attributes option.
- Select P-Preferred-ID from Privacy Information from Privacy option.
- Select Include Privacy from Flags (under Privacy).
- Select Merge Received Contacts with Existing Contacts from Redirect option.
- Select Include None from Include Charge Information option (under SIP Headers and Parameters).
- Select Not Send from Session-Expires Refresher option (under SIP Headers and Parameters).
- Select None from SIP TO Header Mapping option (under SIP Headers and Parameters).
- Select Transparency For Destination Trunk Group Parameter from Flags (under SIP Headers and Parameters).
- Select End To End Ack from Flags (under SIP Headers and Parameters).
- Select Diversion from Call Forwarding (under SIP Headers and Parameters).
- Select Retry Without ETS from the Action For ETS 400 Responses With 417 Reason Code drop-down box (under SIP RPH ETS).
- Set ETS Default Priority Value as 0 (under SIP RPH ETS).
Figure 28: PSX IPSP Engress Ip Attributes
Sip Trunk Group
IBCF (Towards Peer IBCF/IPX)
set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF signaling registration requireRegistration none set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF signaling relayNonInviteRequest enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF services transparencyProfile TRANS_PROF_IBCF set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF media omrAllowed enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF media primaryRealmName RealmName2 set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF media directMediaAllowed disabled set addressContext default zone ZONE_CORENW sipRegRelay enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF callRouting useRouteSet received set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF signaling relayNonInviteRequest enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF callRouting sendRouteUriToPsx enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF signaling skipDTGLookupForRouteHeader enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF services honorSdpClockRate enabled set addressContext default zone ZONE_CORENW sipTrunkGroup IBCF transitIoi "IBCF" commit
The following profiles/fields must be enabled:
- Zone Index Profile
- IP Signaling Profile
- Feature Control Profile
- Signaling Profile
- SIP Domain
- IP Version Preference
- Use IPTG Routing (Hop By Hop Routing) For Ingress (Ingress > Flags)
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
- Select Services as Not Screened.
Figure 29: Sip Trunk Group towards IBCF
Configuring SBC Towards MSC
The following profiles are configured:
Transparency Profile
set profiles services transparencyProfile TRANS_PROF_MSC sipHeader To set profiles services transparencyProfile TRANS_PROF_MSC sipHeader From set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Path set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Accept set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Reason set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Server set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Warning set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Call-Info set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Alert-Info set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Error-Info set profiles services transparencyProfile TRANS_PROF_MSC sipHeader User-Agent set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Referred-By excludedMethods register,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Request-URI set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Accept-Language set profiles services transparencyProfile TRANS_PROF_MSC sipHeader P-Called-Party-Id set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Require set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Proxy-Require set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Security-Client set profiles services transparencyProfile TRANS_PROF_MSC sipHeader Security-Verify commit set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/pidf+xml excludedMethods register,invite,subscribe,info,publish,message,options,update,bye set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/rlmi+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody message/external-body set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/pidf+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/cpim-pidf+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/pidf-diff+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/dialog-info+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/simple-filter+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/resource-lists+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/conference-info+xml set profiles services transparencyProfile TRANS_PROF_MSC sipMessageBody application/simple-message-summary commit set profiles services transparencyProfile TRANS_PROF_MSC state enabled commit set addressContext default zone ZONE_MSC sipTrunkGroup TG_TOWARDS_MSC services transparencyProfile TRANS_PROF_MSC commit
Zone Index Profile
The following fields must be configured:
- Zone Index Profile
- Description
- Zone Index
Figure 30: PSX Zone Index Profile
Ip Signaling Profile
Common Ip Attributes
The following "Common IP Attributes" must be enabled in PSX under "IP SIGNALING PROFILE":
- Add P-Charging Function Addr
- Create P-Charging-Vector
- Create P-Visited-Network Id
- Create Path Header
- Disable Host Translation
- End to End BYE
- End to End re-INVITE
- End to End UPDATE
- End to End PRACK
- Enable Default Procedures
- Enable Dial String Handling
- No Port Number 5060
- P-Called-Party-Id-Support
- Restrict History Info Header
- Store P-Charging Vector
- Store Service-Route Header
- Validate Access Nw Info Header
Figure 31: PSX IPSP-Common Ip Attributes
Relay Flags
The following "Relay Flags" must be enabled under "Ip Signaling profile":
- Dialog Event Package
- Info
- Options
- Select Reject the REFER request if no match is found from Refer To Header Relay option.
Figure 32: PSX IPSP-Common Ip Attributes-Relay Flags
Transparency Flags
The following "Transparency Flag" must be enabled:
- Pass Complete Contact-Header
Figure 33: PSX IPSP-Transparency Flags
Egress Ip Attributes
- Select SIP Only from IP Protocol Type.
- Select BCI Interwork Encountered from BCI option.
- Select Use IP Signaling Peer Domain In R-URI from Domain Name option.
- Select Include npdi from NPDI Options (under Number Portability Attributes option).
- Select P-Asserted-ID from Privacy Information (under Privacy option).
- Select Include Privacy from Flags (under Privacy).
- Select Do Not Include Tel URI In PAI Header from Flags (under Privacy option).
- Select Merge Received Contacts with Existing Contacts from Redirect option.
- Select Include None from Include Charge Information option (under SIP Headers and Parameters).
- Select Not Send from Session-Expires Refresher option (under SIP Headers and Parameters).
- Select None from SIP TO Header Mapping option (under SIP Headers and Parameters).
- Select Include CPC Information from Flags (under SIP Headers and Parameters option).
- Select Transparency For Destination Trunk Group Parameter from Flags (under SIP Headers and Parameters option).
- Select End To End Ack from Flags (under SIP Headers and Parameters option).
- Select Diversion from Call Forwarding (under SIP Headers and Parameters option).
- Select Retry Without ETS from the Action For ETS 400 Responses With 417 Reason Code drop-down box (under SIP RPH ETS option).
- Set ETS Default Priority Value as 0 (under SIP RPH ETS).
Figure 34: PSX IPSP Egress Ip Attributes
Ingress Ip Attributes
The following "Ingress Ip Attribute" must be enabled:
- Map Called Party Category In P-Sig-Info Header
Figure 35: PSX IPSP-Ingress Ip Attributes
Sip Trunk Group
The following profiles/fields must be enabled:
- Zone Index Profile
- IP Signaling Profile
- Feature Control Profile
- Signaling Profile
- SIP Domain
- IP Version Preference
- Do Not Use For Fallback Bearer Capability (Egress > Flags)
- IP Peer Supported (Egress > IPTG)
- Egress IP Signaling Profile (Egress > IPTG)
- Select Traffic Management Options from Trunk Group Reserved Level 1 and Trunk Group Reserved Level 2.
- Select Services as Not Screened.
Overview
Content Tools